Harbor Freight Tools 95346 warranty Gasoline Auger Drill, Your Warranty Is Voided If

Page 1

GASOLINE AUGER DRILL

1.5 HP

Model 95346

Assembly And Operation Instructions

Due to continuing improvements, actual product may differ slightly from the product described herein.

CAUTION!

Your Warranty Is Voided If:

You do not operate the Auger Drill with the proper 25:1 unleaded fuel/2-cycle oil mix in its fuel tank. Never run the Engine with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix, will permanently damage the unit.

You do not operate the Auger Drill with the proper amount of SAE 80-90 gear oil in its Gearbox. Never run the Auger Drill with low or no gear oil. Running the Auger Drill with low or no gear oil will permanently damage the unit.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

To prevent serious injury, read and understand

all warnings and instructions before use.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 07b, 07e

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Gasoline Auger Drill Your Warranty Is Voided IfSave this Manual SpecificationsSKU For technical questions, please call Personal Safety General Safety Rules and PrecautionsWork Area Tool USE and CareService Specific Safety Rules and PrecautionsIMPORTANT! Your Warranty is voided if Fire and Explosion Precautions Carbon Monoxide PrecautionsChemical Precautions Mechanical PrecautionsNoise Precautions Use only Engine manufacturer recommended fuel and oilUnpacking AssemblySee Figure a SKU For technical questions, please call See Figure B PRE-START InstructionsSee Figure B SKU For technical questions, please call Starting and Stopping OperationFigure D Do not attempt to drill at an angle Running. See Figure ESee Figure E See Figure E SKU For technical questions, please callINSPECTION, MAINTENANCE, and Cleaning Problem Possible Cause Possible Solution TroubleshootingPlease Read the Following Carefully Part Description Qty Parts List EngineAssembly Diagram Engine Assembly Diagram Gearbox Unit Parts List Gearbox UnitParts List & Assembly Diagram Frame Emission Control System Warranty Limited 1 year / 90 Day warranty
Top Page Image Contents