Additional PRECAUTIONS
1.DANGER! People with pacemakers should not use this tool. This tool produces strong electromagnetic fields that can cause pacemaker interference or pacemaker failure. People with pacemakers should consult their physician(s) for advice.
2.WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 14, 16, and 18 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY
SAFETY PIN (35a) |
|
|
|
|
| PIN (34a) |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
| TRANSMISSION SHAFT | ||
|
|
|
|
|
| (15a) |
| AUGER |
|
|
|
| |
|
| |||||
| (33a) | |||||
FIGURE A
Insert the shank of the Auger (33a) fully upward into the Transmission Shaft (15a). Align the mounting holes in the Auger and Transmission Shaft. Then secure the Auger to the Auger Drill, using the Pin (34a) and Safety Pin (35a).
(See Figure A.)
SKU 95346 | For technical questions, please call | PAGE |