Harbor Freight Tools 44836 manual CLEANING, INSPECTION, and Maintenance

Page 11

5.Set the depth of drill bit travel so that the drill bit cannot come into contact with

the Table (part #9A), or align the Table so that the hole in its center is in line with the drill bit.

6.The Drill Press is now ready to operate.

CLEANING, INSPECTION, AND MAINTENANCE

1.Caution: Always disconnect the Drill Press from its electrical power supply source before performing any cleaning, inspection, or maintenance.

2.Do not introduce water into the electric motor through the motor vents.

3.Do not use solvents to wipe off the Drill Press, as damage may result.

4.With a brush or soft cloth, remove all the metal shavings/sawdust from the Drill Press.

5.If necessary, wipe with a damp cloth. You may use a mild detergent.

6.Once clean, lubricate all moving parts, including the Column (part #1A) with a light oil.

7.When storing, keep the Drill Press covered with a cloth cover.

8.Before each use, inspect the general condition of the Drill Press. Inspect the switch, power plug and cord assembly, and extension cord (if used) for damage.

9.Check for loose screws, misalignment, binding of moving parts, broken, cracked, or improper mounting of drill bit, broken parts and any other condition that may affect its safe operation.

10.Check the V-Belts (parts #21C, 26C) for wear, and replace if frayed or damaged in any way.

11.Blow out any dust that may have accumulated in the motor fan.

12.If abnormal noise or vibration occurs, turn off the Drill Press immediately.

13.If a problem is apparent refer to Figure G, and if necessary have the problem corrected by a qualified technician before further use.

Do not use damaged equipment.. (See Figure G on Page 12.)

SKU 44836

PAGE 11

Image 11
Contents Drill Press General Safety Warnings and Precautions SpecificationsIndustrial Applications Must Follow Osha Requirements Pecific Product Warnings and PrecautionsFigure a Operating Instructions UnpackingSee Assembly Diagrams a and B Spindle Speed in R. R. M To Install/Reposition The Drive BeltsFigure C To Obtain The Proper Cutting SpeedsTo Adjust The Spindle Depth To Adjust The TableTo Operate The Drill Press Drill Press is now ready to operate CLEANING, INSPECTION, and MaintenanceFigure G Please Read the Following Carefully Parts LIST/ASSEMBLY Diagram aParts List B Assembly Diagram B Parts LIST/ASSEMBLY Diagram C

44836 specifications

The Harbor Freight Tools 44836 is a highly regarded portable generator designed to meet a variety of power needs for both residential and commercial applications. With an emphasis on performance and reliability, this generator has gained popularity among DIY enthusiasts, contractors, and those seeking backup power solutions.

One of the standout features of the Harbor Freight 44836 is its impressive power output. Equipped with a robust 3500 starting watts and 3000 running watts, this generator can easily support essential household appliances, making it ideal for use during power outages. The 87cc engine contributes to the generator's efficient fuel consumption, ensuring longer run times while minimizing operational costs.

The generator is built with a durable frame, making it resilient against various outdoor conditions. Its lightweight design and compact size provide convenience in transportation and storage, which is particularly beneficial for those who require a portable solution for job sites or camping trips. Safety features are also a priority with the inclusion of low oil shut-off, which automatically turns off the engine to prevent damage and extend the life of the generator.

A key technology that enhances the performance of the Harbor Freight 44836 is its inverter system. Unlike traditional generators that produce a raw power output, this inverter generator produces clean and stable electricity, making it suitable for sensitive electronics such as laptops, smartphones, and medical devices. This feature is particularly appealing to users who need to charge their devices safely while on the go.

In terms of usability, the generator comes with easy-to-use controls, including multiple outlets that allow simultaneous operation of various devices. Additionally, the noise levels are kept to a minimum, providing a quieter operation compared to standard generators, making it suitable for neighborhoods and camping environments.

Overall, the Harbor Freight Tools 44836 offers a powerful, portable, and safe solution for those in need of reliable electrical power. Its combination of efficient fueling, clean power output, and convenient design positions it as an excellent choice for a wide range of applications. Whether you're preparing for an emergency or enjoying outdoor activities, this generator provides the peace of mind that comes with knowing you have dependable power at your fingertips.