See Assembly Diagrams a and B | Harbor Freight Tools 44836 instruction

3.To attach the Head Assembly (part #1B) to the Column (part #1A), loosen the Hex Screws (part #13B) to ensure the Screws do not protrude internally in the Column (part #1A), as this would prevent the Head Assembly from sliding downward fully onto the Column. With assistance raise the Head Assembly and slide it fully onto the Column, aligning the Head Assembly with the Base (part #4A). Lock the Head Assembly in place by tightening the Hex Screws (part #13B).

(See Assembly Diagrams A and B.)

4.To attach the Knobs (part #16B) and Rods (part #17B) onto the Hub Assembly (part #18B), screw the three Knobs onto the three Rods. Then, screw the three Rods into the Hub Assembly. (See Assembly Diagram B.)

5.To attach the Chuck (part #8C), attach the Table Crank (part #6A) to the Table Support (part #10A). Raise the Table (part #9A) up the Column (part #1A) to within 6” of the Tube Quill (part #10C). Open the jaws of the Chuck (part #8C), using the Key Chuck (part #9C). Place a piece of scrap wood on the Table to protect the nose of the Chuck. Insert the Spindle Shaft (part #7C)-which includes Drill Chuck Arbor (part 30C), firmly into the end of the Chuck.

Insert the other end of the Spindle Shaft into the Tube Quill, and turn the Spindle Shaft until the prong on the Spindle Shaft aligns with the slot in the Tube Quill. Lower the Spindle Shaft, and press the nose of the Chuck firmly down onto the scrap wood on the Table until the Chuck is securely seated.

(See Assembly Diagrams A and C.)

To Attach The Remaining Handle:

1.To attach the Knob (part #1C) to the Pulley Guard (part #5C), use the Pan Head Screw (part #2C) provided. (See Assembly Diagram C.)

To Mount The Drill Press On A Workbench:

1.When in use, the Drill Press should be securely mounted to a flat, level, sturdy workbench capable of supporting the weight of the Drill Press, accessories, and the material being drilled.

2.The Base (part #4A) of the Drill Press features four 1/2” mounting holes.

(See Assembly Diagram A.)

3.With assistance, set the Drill Press in the desired position on the workbench.

4.Using the mounting holes on the Base (part #4A) as a template, mark the 1/2” holes to be drilled through the top of the workbench.

5.With assistance, set the Drill Press aside.

6.Use a 1/2” drill bit to drill the four holes through the workbench. Reposition the Drill Press on the workbench and secure the Drill Press to the workbench, using four 1/2”

SKU 44836

PAGE 6

REV 04/04

44836 specifications

The Harbor Freight Tools 44836 is a highly regarded portable generator designed to meet a variety of power needs for both residential and commercial applications. With an emphasis on performance and reliability, this generator has gained popularity among DIY enthusiasts, contractors, and those seeking backup power solutions.

One of the standout features of the Harbor Freight 44836 is its impressive power output. Equipped with a robust 3500 starting watts and 3000 running watts, this generator can easily support essential household appliances, making it ideal for use during power outages. The 87cc engine contributes to the generator's efficient fuel consumption, ensuring longer run times while minimizing operational costs.

The generator is built with a durable frame, making it resilient against various outdoor conditions. Its lightweight design and compact size provide convenience in transportation and storage, which is particularly beneficial for those who require a portable solution for job sites or camping trips. Safety features are also a priority with the inclusion of low oil shut-off, which automatically turns off the engine to prevent damage and extend the life of the generator.

A key technology that enhances the performance of the Harbor Freight 44836 is its inverter system. Unlike traditional generators that produce a raw power output, this inverter generator produces clean and stable electricity, making it suitable for sensitive electronics such as laptops, smartphones, and medical devices. This feature is particularly appealing to users who need to charge their devices safely while on the go.

In terms of usability, the generator comes with easy-to-use controls, including multiple outlets that allow simultaneous operation of various devices. Additionally, the noise levels are kept to a minimum, providing a quieter operation compared to standard generators, making it suitable for neighborhoods and camping environments.

Overall, the Harbor Freight Tools 44836 offers a powerful, portable, and safe solution for those in need of reliable electrical power. Its combination of efficient fueling, clean power output, and convenient design positions it as an excellent choice for a wide range of applications. Whether you're preparing for an emergency or enjoying outdoor activities, this generator provides the peace of mind that comes with knowing you have dependable power at your fingertips.