|
|
|
|
|
|
|
|
| SPECIFICATIONS | ||
|
|
|
| ||
| Battery | 18V, |
| ||
| Speed |
| |||
| Torque Settings | 6 |
|
|
|
| Chuck | 3/8” Keyless |
| ||
| Drill Weight | 4.3 lb. |
| ||
| Length | 9” |
| ||
| Included Bits | 6 Pc. Screw. Set; 6 Pc. Drill Set; Magnetic Extension Bit |
| ||
|
|
|
|
|
|
|
|
| SAVE THIS MANUAL | ||
You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite inju- ries.
2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children.
4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this tool.
5.USE EYE, HEARING, AND BREATHING PROTECTION. Wear
6.DRESS SAFELY. Nonskid footwear or safety shoes should be used when working with this product. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in mov- ing parts. If wearing a
7.INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
8.DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera.
9.STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use this tool when you are tired or distracted from the job at hand.
REV 03a, 08a
SKU 44849 | For technical questions, please call | Page 2 |