Harbor Freight Tools 44849 manual Unpacking, To Charge The Battery

Page 5

UNPACKING

When unpacking, check to make sure all parts shown on the Parts List (page 10) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

To Charge The Battery:

1.The Battery (11) does not come charged from the manufacturer. Before use, you must charge the Battery.

FIGURE A

2.Plug the Battery Charger into the electrical outlet.

Battery

(11)

FIGURE B

3.Insert the Battery (11) into the Battery Charger. (See Figure B.)

CAUTION! Make certain to insert the battery in the correct orientation, as noted in Fig- ure B. Inserting the battery improperly will damage the charger and will prevent the battery from charging properly.

REV 03a; 05j; 07l

SKU 44849

For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callFor technical questions, please call SpecificationsGeneral Safety Warnings and Precautions Specific Product Warnings and Precautions For technical questions, please call Unpacking To Charge The BatterySee Figure C To Attach The Charged Battery To The DrillFigure D To Insert And Remove Drill Bits And DriversTo Operate The Torque Selector To Operate The Reversing SwitchOperating Instructions Drilling An Object Drill Bit SelectionDisposal of Ni-Cd Battery Cleaning and MaintenanceSKU For technical questions, please call Parts ListPart Description Parts Assembly Electrical Schematic Limited 90 DAY Warranty