Hitachi Koki USA DH 24PE instruction manual Never operate without all guards in place

Page 5

English

(3)Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

(4)Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

(5)Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

(6)Use safety equipment. Always wear protective grasses. Dust mask, non-skid safety shoes, hard hat, or ear plugs must be used for appropriate conditions.

4.Tool Use and Care

(1)Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to lose of control.

(2)Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

(3)Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

(4)Disconnect the plug form the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

(5)Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hand of untrained users.

(6)Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

(7)Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

(8)Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

5.Service

(1)Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

(2)When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instruction may create a risk of electric shock or injury.

6.Never touch moving parts.

Never place your hands, fingers or other body parts near the tool’s moving parts.

7.Never operate without all guards in place.

Never operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the tool.

8.Use right tool.

Don’t force small tool or attachment to do the job of a heavy-duty tool.

Don’t use tool for purpose not intended — for example — don’t use circular saw for cutting tree limbs or logs.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Advertencia AvertissementContents Important Information Meanings of Signal WordsGeneral Safety Rules SafetyNever operate without all guards in place Keep all screws, bolts and covers tightly in place Specific Safety Rules and Symbols Double Insulation for Safer Operation Make Them Available to Other Users of this ToolName of Parts SpecificationsFunctional Description Prior to Operation Assembly and OperationApplications Mounting the drill bit Fig Switch operation HOW to USESelecting the driver bit Confirm the direction of bit rotation FigRotation only When driving machine screws FigStriking only When driving wood screws FigUsing depth gauge Fig Mounting HOW to USE the Core BIT for Light LoadHow to bore Fig Dismounting Fig Maintenance and Inspection Standard Accessories AccessoriesOptional Accessories Drill Bit Taper shank and taper shank adaptorKnock-in anchor Striking only Inner wedge type with the headless screw Outer wedge type with the female screwOuter wedge type with Female screw Inner wedge type with Headless screwDemolishing operation Striking only Guide plateGroove digging and edging Striking only Grooving Striking onlyDrilling holes Rotation only Dust cup and Dust collector B Driving Screws Rotation onlyPhillips Driver Bit Signification DES Mots D’AVERTISSEMENT Informations ImportantesConserver CES Instructions SecuriteRegles Generale DE Securite Français Garder propres les évents d’air du moteur Watt Construction de classe Min .... tours par minute Regles DE Securite Specifiques ET SymbolesDouble Isolation Pour UN Fonctionnement Plus SUR NOM DES Parties Description FonctionnelleAvant L’UTILISATION Le sens de la flèche et sortir le foret Montage du foret de perçage FigSélection de la mèche pour visseuse UtilisationVérifiez la direction de rotation de la mèche Fig Fonctionnement de l’interrupteurRotation seulement Rotation + frappeEnfoncement de vis à bois Fig Lors du vissage des vis machine FigUtilisation de la quenouille Fig Percussion uniquementMontage Comment Utiliser LA Couronne Pour UNE Charge LegereDémontage Fig Perçage FigEntretien ET Inspection Foret de perçage queue conique et raccord de queue conique AccessoiresAccessoires Standard Cône en a 303619 Ancrage de chasse Percussion uniquementPerçage de trou à large diamètre rotation + frappe Type à cale extérieure avec vis femelleType à cale intérieure avec vis sans tête Creusage de rainures Percussion uniquement Plaque centrale de guidageTravail de démolissage Percussion uniquement Perçage de trous rotation seulement Capuchon anti-poussière et collecteur à poussière B Vis d’entraînement rotation uniquementEmbout de vissage Phillips Significado DE LAS Palabras DE Señalización Información ImportanteGuarde Estas Instrucciones SeguridadNormas Generales DE Seguridad Español Utilice la herramienta correcta Maneje con cuidado las herramientas eléctricas Normas Y Símbolos Específicos DE SeguridadAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Especificaciones Descripción FuncionalNomenclatura Antes DE LA Operación Montaje Y OperaciónAplicaciones Precaución Montaje de la broca FigSelección de la broca destornillador Como SE USAConfirmar la dirección de rotación de la broca Fig Operación del conmutadorRotación solamente Rotación + golpeteoAtornillando tornillos para madera Fig Cuando coloque tornillos para metalModo de usar el tope Fig Percusión solamenteMontaje Modo DE Usar LA Barrena Tubular Para Cargas LigerasDesmontaje Fig Modo de taladrar FigMantenimiento E Inspección Broca de taladro vástago cónico y adaptador cónico AccesoriosAccesorios Estándar Ancla de martillar Percusión solamente Tipo de reborde interior con tornillo sin cabeza Tipo de reborde exterior con tornillo hembraTrabajo de roturación Percusión solamente Placa guiaExcavar, ranuado y rebordes Percusión solamente Ranurado Percusión solamentePerforación rotación solamente Copa de polvo y colector de polvo B Colocación de tornillos rotación solamenteBroca para tornillos Plillips Page Page D5 ⋅ Kestrel Road Mississauga on L5T 1Z5

DH 24PE specifications

The Hitachi Koki USA DH 24PE is a powerful and versatile rotary hammer drill that is designed to handle a variety of demanding tasks in construction and renovation projects. Known for its reliability and performance, this tool is a favorite among professionals and DIY enthusiasts alike.

One of the standout features of the DH 24PE is its robust 2.2-amp motor, which delivers a remarkable 6.8 Joules of impact energy. This power enables the drill to tackle tough materials, including concrete, brick, and masonry, with ease. The rotary hammer drill offers two different modes of operation, allowing users to switch between hammer drilling and regular drilling, providing versatility for various applications.

Another essential aspect of the DH 24PE is its lightweight design. Weighing only 5.3 pounds, this rotary hammer drill is easy to maneuver, reducing user fatigue during extended use. The ergonomic handle ensures a comfortable grip, promoting better control and precision while working.

The DH 24PE is equipped with a unique vibration reduction system. This technology minimizes vibrations during operation, enhancing user comfort and allowing for prolonged use without discomfort. This feature is especially valuable in heavy-duty drilling tasks where extended periods of operation are common.

Durability is another key characteristic of the Hitachi Koki DH 24PE. The tool is constructed with high-quality materials, ensuring longevity and reliability even under harsh working conditions. Additionally, the robust design protects the internal components from dust and debris, contributing to its overall durability.

For convenience, the DH 24PE features a depth gauge that allows users to set precise drilling depths, which is crucial for tasks that require accuracy. Furthermore, the quick-change chuck system enables easy bit changes, enhancing efficiency on the job site.

In summary, the Hitachi Koki USA DH 24PE is a dependable rotary hammer drill packed with essential features, including a powerful motor, lightweight design, vibration reduction technology, and durable construction. Its versatility and user-friendly characteristics make it an excellent choice for both professional contractors and DIY enthusiasts looking for a reliable tool for their projects.
Top Page Image Contents