Hitachi Koki USA DH 24PE instruction manual Keep all screws, bolts and covers tightly in place

Page 6

English

9.Never use a power tool for applications other than those specified.

Never use a power tool for applications other than those specified in the Instruction Manual.

10.Handle tool correctly.

Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.

11.Keep all screws, bolts and covers tightly in place.

Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.

12.Do not use power tools if the plastic housing or handle is cracked.

Cracks in the tool’s housing or handle can lead to electric shock. Such tools should not be used until repaired.

13.Blades and accessories must be securely mounted to the tool.

Prevent potential injuries to yourself or others. Blades, cutting implements and accessories which have been mounted to the tool should be secure and tight.

14.Keep motor air vent clean.

The tool’s motor air vent must be kept clean so that air can freely flow at all times. Check for dust build-up frequently.

15.Operate power tools at the rated voltage.

Operate the power tool at voltages specified on its nameplate.

If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out.

16.Never use a tool which is defective or operating abnormally.

If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.

17.Never leave tool running unattended. Turn power off. Don’t leave tool until it comes to a complete stop.

18.Carefully handle power tools.

Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged.

19.Do not wipe plastic parts with solvent.

Solvents such as gasolie, thinner, benzine, carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe them with such solvents.

Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Avertissement AdvertenciaContents Meanings of Signal Words Important InformationSafety General Safety RulesNever operate without all guards in place Keep all screws, bolts and covers tightly in place Specific Safety Rules and Symbols Make Them Available to Other Users of this Tool Double Insulation for Safer OperationSpecifications Functional DescriptionName of Parts Assembly and Operation ApplicationsPrior to Operation Mounting the drill bit Fig Selecting the driver bit HOW to USESwitch operation Confirm the direction of bit rotation FigWhen driving machine screws Fig Rotation onlyWhen driving wood screws Fig Striking onlyUsing depth gauge Fig HOW to USE the Core BIT for Light Load How to bore FigMounting Dismounting Fig Maintenance and Inspection Optional Accessories AccessoriesStandard Accessories Drill Bit Taper shank and taper shank adaptorKnock-in anchor Striking only Outer wedge type with Female screw Outer wedge type with the female screwInner wedge type with the headless screw Inner wedge type with Headless screwGroove digging and edging Striking only Guide plateDemolishing operation Striking only Grooving Striking onlyDrilling holes Rotation only Driving Screws Rotation only Phillips Driver BitDust cup and Dust collector B Informations Importantes Signification DES Mots D’AVERTISSEMENTSecurite Regles Generale DE SecuriteConserver CES Instructions Français Garder propres les évents d’air du moteur Regles DE Securite Specifiques ET Symboles Watt Construction de classe Min .... tours par minuteDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Montage du foret de perçage Fig Le sens de la flèche et sortir le foretVérifiez la direction de rotation de la mèche Fig UtilisationSélection de la mèche pour visseuse Fonctionnement de l’interrupteurRotation + frappe Rotation seulementLors du vissage des vis machine Fig Enfoncement de vis à bois FigPercussion uniquement Utilisation de la quenouille FigComment Utiliser LA Couronne Pour UNE Charge Legere MontagePerçage Fig Démontage FigEntretien ET Inspection Accessoires Accessoires StandardForet de perçage queue conique et raccord de queue conique Ancrage de chasse Percussion uniquement Cône en a 303619Type à cale extérieure avec vis femelle Type à cale intérieure avec vis sans têtePerçage de trou à large diamètre rotation + frappe Plaque centrale de guidage Travail de démolissage Percussion uniquementCreusage de rainures Percussion uniquement Perçage de trous rotation seulement Vis d’entraînement rotation uniquement Embout de vissage PhillipsCapuchon anti-poussière et collecteur à poussière B Información Importante Significado DE LAS Palabras DE SeñalizaciónSeguridad Normas Generales DE SeguridadGuarde Estas Instrucciones Español Utilice la herramienta correcta Normas Y Símbolos Específicos DE Seguridad Maneje con cuidado las herramientas eléctricasAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Descripción Funcional NomenclaturaEspecificaciones Montaje Y Operación AplicacionesAntes DE LA Operación Montaje de la broca Fig PrecauciónConfirmar la dirección de rotación de la broca Fig Como SE USASelección de la broca destornillador Operación del conmutadorRotación + golpeteo Rotación solamenteCuando coloque tornillos para metal Atornillando tornillos para madera FigPercusión solamente Modo de usar el tope FigModo DE Usar LA Barrena Tubular Para Cargas Ligeras MontajeModo de taladrar Fig Desmontaje FigMantenimiento E Inspección Accesorios Accesorios EstándarBroca de taladro vástago cónico y adaptador cónico Ancla de martillar Percusión solamente Tipo de reborde exterior con tornillo hembra Tipo de reborde interior con tornillo sin cabezaExcavar, ranuado y rebordes Percusión solamente Placa guiaTrabajo de roturación Percusión solamente Ranurado Percusión solamentePerforación rotación solamente Colocación de tornillos rotación solamente Broca para tornillos PlillipsCopa de polvo y colector de polvo B Page Page D5 ⋅ Kestrel Road Mississauga on L5T 1Z5

DH 24PE specifications

The Hitachi Koki USA DH 24PE is a powerful and versatile rotary hammer drill that is designed to handle a variety of demanding tasks in construction and renovation projects. Known for its reliability and performance, this tool is a favorite among professionals and DIY enthusiasts alike.

One of the standout features of the DH 24PE is its robust 2.2-amp motor, which delivers a remarkable 6.8 Joules of impact energy. This power enables the drill to tackle tough materials, including concrete, brick, and masonry, with ease. The rotary hammer drill offers two different modes of operation, allowing users to switch between hammer drilling and regular drilling, providing versatility for various applications.

Another essential aspect of the DH 24PE is its lightweight design. Weighing only 5.3 pounds, this rotary hammer drill is easy to maneuver, reducing user fatigue during extended use. The ergonomic handle ensures a comfortable grip, promoting better control and precision while working.

The DH 24PE is equipped with a unique vibration reduction system. This technology minimizes vibrations during operation, enhancing user comfort and allowing for prolonged use without discomfort. This feature is especially valuable in heavy-duty drilling tasks where extended periods of operation are common.

Durability is another key characteristic of the Hitachi Koki DH 24PE. The tool is constructed with high-quality materials, ensuring longevity and reliability even under harsh working conditions. Additionally, the robust design protects the internal components from dust and debris, contributing to its overall durability.

For convenience, the DH 24PE features a depth gauge that allows users to set precise drilling depths, which is crucial for tasks that require accuracy. Furthermore, the quick-change chuck system enables easy bit changes, enhancing efficiency on the job site.

In summary, the Hitachi Koki USA DH 24PE is a dependable rotary hammer drill packed with essential features, including a powerful motor, lightweight design, vibration reduction technology, and durable construction. Its versatility and user-friendly characteristics make it an excellent choice for both professional contractors and DIY enthusiasts looking for a reliable tool for their projects.
Top Page Image Contents