Desa 496 operating instructions Why a Power Fastener Holds, WHY a Power Fastener Holds in Concrete

Page 12

Why A Power Fastener Holds

WHY A POWER FASTENER HOLDS IN CONCRETE

The compression bond of the concrete to the power fastener accounts for the majority of the holding power. The fastener displaces the concrete which tries to return to its original form causing a squeezing effect.

Maximum holding power is achieved when the depth of penetration produces a bond on the power fastener equal to the strength of the concrete. As a general rule, pene- tration should be approximately 1" to 1 1/4" into the base concrete. Make sure the concrete is at least three times as thick as the intended fastener penetration. Never have the power fastener point protrude through the concrete.

NOTE: Concrete needs to cure for 28 days before maximum fastening holding power will be achieved.

WHY A POWER FASTENER HOLDS IN STEEL

Holding power in steel depends on the elasticity of the steel. The steel pushes back on the shank of the power fastener.

Drop a marble into water; the water parts, the marble continues down, the water closes back. This is similar to the reaction when a power fastener penetrates steel.

In steel, the point of the power fastener must penetrate completely through for highest holding power. If the fastener does not penetrate, the spring action of the steel pushes back on the point and tends to force the fastener out.

Recommended applications are between 3/16-3/8" steel.

NOTE: When fastening in steel be sure the point goes through the steel.

482-64

482-65

105635

12

Image 12
Contents Model Powder Actuated ToolIndex Before Using Safety Precautions Handling the ToolPowe Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Plastic Flute Why a Power Fastener Holds WHY a Power Fastener Holds in ConcreteSelecting Power Fasteners and Power loads OverdriveOperation Operation Parts List 496 Key Part DescriptionCleaning and Maintenance Tool Disassembly Removing Barrel AssemblyRemoving Rear PAD and Handle PAD Assembly Removing Rocker ARM AssemblyRemoving Trigger Assembly Removing Outer Liner Assembly from HousingRemoving Firing PIN Tool Assembly Inserting Outer Liner Assembly Into HousingAttaching Trigger Assembly to Housing Attaching Firing PIN AssemblyAttaching Rear PAD and Handle PAD Assembly Assembling Barrel AssemblyReplacing Stop Troubleshooting Guide Problem Possible Cause RemedyParts Centrals FastenersSP Fasteners Application Chart For fastening this To thisMaintenance Log Limited Warranty Agreement A. only

496 specifications

Desa 496 is an innovative and versatile solution designed to meet the demands of modern living. This breakthrough development focuses on enhancing the quality of life through advanced technologies while ensuring environmental sustainability.

One of the main features of Desa 496 is its smart home integration. Each unit is equipped with IoT devices that allow residents to control lighting, heating, and security systems from their smartphones. This integration not only provides convenience but also optimizes energy usage, leading to significant cost savings over time. Energy-efficient appliances are standard, promoting a greener lifestyle throughout the community.

Another notable characteristic of Desa 496 is its commitment to sustainability. The development features green roofs that not only improve insulation but also contribute to urban biodiversity. Rainwater harvesting systems are employed to minimize water wastage and reduce the overall ecological footprint of the community. These systems capture rainwater for irrigation and greywater uses, further enhancing the sustainability of the environment.

Desa 496 is also designed with communal spaces that foster a sense of community among residents. Parks, gardens, and recreational areas are strategically placed throughout the development, encouraging outdoor activities and social interactions. These communal spaces are enhanced with the use of smart technology, such as lighting systems that adjust based on the time of day, ensuring safety and comfort for all users.

The architecture and design of Desa 496 emphasize natural light and open spaces, with large windows and well-planned layouts that create a sense of openness. The use of sustainable materials in construction further complements the development's commitment to environmental responsibility.

Security is a priority in Desa 496, with advanced surveillance systems and controlled access points that ensure the safety of all residents. Smart sensors are integrated into the infrastructure, enabling real-time monitoring and alerts in case of any security breaches.

In conclusion, Desa 496 is not just a residential development; it is a forward-thinking community that leverages technology to enhance the quality of life while prioritizing sustainability and safety. Its innovative features make it a benchmark for future urban living, proving that luxury and ecological responsibility can go hand in hand.