Desa 496 operating instructions Tool Assembly, Inserting Outer Liner Assembly Into Housing

Page 21

Tool Assembly

WARNING: Always unload a powder actuated tool before disassembling, replacing barrel, cleaning, or assembling.

A. INSERTING OUTER LINER ASSEMBLY INTO HOUSING

1.Place ball bearing and spring in end of outer liner assembly (see Figure 11, page 20).

2.Slide outer liner assembly into tool body.

B. ATTACHING TRIGGER ASSEMBLY TO HOUSING

1.Insert trigger assembly into tool body at rear of housing (see Figure 10, page 20).

2.Secure trigger pin by inserting trigger pin through housing and trigger assembly (see Figure 10, page 20) .

C. ATTACHING FIRING PIN ASSEMBLY

1.Insert push pin into hole in housing next to outer liner assembly (see Figure 12).

2.Insert firing pin assembly in outer liner assembly.

3.Insert spring and sear through slot on outer liner assembly and into slot in firing pin assembly (see Figure 12).

4.Slide firing pin guide on outer liner assembly (see Figure 13).

5.Slide springs on outer liner assembly (see Figure 13).

 

Sear

Springs

 

 

Sear

 

 

Spring

 

 

 

Outer Liner

 

Firing Pin Assembly

Assembly

Firing Pin

 

Guide

 

 

Figure 12 - Inserting Firing Pin

Figure 13 - Inserting Firing Pin

Assembly, Spring, Sear, and Push Pin

Guide and Springs

 

D. REPLACING ROCKER ARM ASSEMBLY

1.Insert rocker arm spring in recess on assembly handle pad (see Figure 14).

2.Put rocker arm assembly inside of the housing. Line up screw hole in housing with hole in rocker arm assembly (see Figure 15).

Rocker Arm

Spring

Assembly

Handle Pad

Rocker Arm

Assembly

Figure 14 - Replacing Rocker Arm

Figure 15 - Replacing Rocker Arm

Spring into Handle Pad

Assembly into Housing

105635

21

Continued

 

 

 

Image 21
Contents Powder Actuated Tool ModelIndex Before Using Handling the Tool Safety PrecautionsPowe Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Plastic Flute WHY a Power Fastener Holds in Concrete Why a Power Fastener HoldsOverdrive Selecting Power Fasteners and Power loadsOperation Operation Key Part Description Parts List 496Cleaning and Maintenance Removing Barrel Assembly Tool DisassemblyRemoving Rocker ARM Assembly Removing Rear PAD and Handle PAD AssemblyRemoving Trigger Assembly Removing Outer Liner Assembly from HousingRemoving Firing PIN Inserting Outer Liner Assembly Into Housing Tool AssemblyAttaching Trigger Assembly to Housing Attaching Firing PIN AssemblyAssembling Barrel Assembly Attaching Rear PAD and Handle PAD AssemblyReplacing Stop Problem Possible Cause Remedy Troubleshooting GuideParts Centrals FastenersSP Fasteners For fastening this To this Application ChartMaintenance Log A. only Limited Warranty Agreement

496 specifications

Desa 496 is an innovative and versatile solution designed to meet the demands of modern living. This breakthrough development focuses on enhancing the quality of life through advanced technologies while ensuring environmental sustainability.

One of the main features of Desa 496 is its smart home integration. Each unit is equipped with IoT devices that allow residents to control lighting, heating, and security systems from their smartphones. This integration not only provides convenience but also optimizes energy usage, leading to significant cost savings over time. Energy-efficient appliances are standard, promoting a greener lifestyle throughout the community.

Another notable characteristic of Desa 496 is its commitment to sustainability. The development features green roofs that not only improve insulation but also contribute to urban biodiversity. Rainwater harvesting systems are employed to minimize water wastage and reduce the overall ecological footprint of the community. These systems capture rainwater for irrigation and greywater uses, further enhancing the sustainability of the environment.

Desa 496 is also designed with communal spaces that foster a sense of community among residents. Parks, gardens, and recreational areas are strategically placed throughout the development, encouraging outdoor activities and social interactions. These communal spaces are enhanced with the use of smart technology, such as lighting systems that adjust based on the time of day, ensuring safety and comfort for all users.

The architecture and design of Desa 496 emphasize natural light and open spaces, with large windows and well-planned layouts that create a sense of openness. The use of sustainable materials in construction further complements the development's commitment to environmental responsibility.

Security is a priority in Desa 496, with advanced surveillance systems and controlled access points that ensure the safety of all residents. Smart sensors are integrated into the infrastructure, enabling real-time monitoring and alerts in case of any security breaches.

In conclusion, Desa 496 is not just a residential development; it is a forward-thinking community that leverages technology to enhance the quality of life while prioritizing sustainability and safety. Its innovative features make it a benchmark for future urban living, proving that luxury and ecological responsibility can go hand in hand.