Desa 496 operating instructions Troubleshooting Guide, Problem Possible Cause Remedy

Page 24

Troubleshooting Guide

PROBLEM

POSSIBLE CAUSE

REMEDY

Piston hangs out

Tool overdriven.

Tap piston on hard surface

of muzzle.

 

until piston is pushed back

 

 

into the guide. (See Over-

 

 

driven Fastener below)

 

 

 

 

Piston not properly

Remove barrel assembly

 

assembled in relation to

(see pages 18-20). Replace

 

stop.

all damaged or missing parts.

 

 

 

 

Broken piston or piston ring.

Replace piston or piston ring

 

 

or take tool to your distributor.

 

 

 

Overdriven

Excessive power.

Change either to next lower

fastener.

 

power load or next longer

 

 

length fastener.

 

 

 

Piston jammed.

Overdriving of fastener (see

Remove barrel assembly

 

above).

(see pages 18-20). Replace

 

 

other parts if damaged.

 

 

 

Power load strip will

Advance bar or spring

Replace advance bar or

not advance.

damaged

springs.

 

 

 

 

Tool dirty.

Clean tool. Notice: Do not

 

 

attempt to clean power load

 

 

strip channel with wire brush.

 

 

You may damage tool.

 

 

 

Reduction or loss

Piston not returning to full

Barrel must be opened to the

of power.

rear position.

full extended position to

 

 

properly position piston.

 

 

 

 

Worn piston ring or broken

Replace piston and/or piston

 

piston.

ring or take tool to your dis-

 

 

tributor.

 

 

 

Tool does not

Misassembled or damaged

Remove firing pin guide and

completely depress.

sear, firing pin parts, or

check all parts for correct fit

 

guide.

assembly.

 

 

 

Tool does not fire.

Failure of tool to depress

See data listed under Tool

 

completely.

does not completely de-

 

 

press, above.

 

Piston not fully reset.

Fully reset piston. See step 1

 

 

under Operation, page 14.

 

 

 

 

Dirt buildup on sear not

Check firing pin mark on

 

allowing proper penetration

power load. Clean firing pin

 

of firing pin or worn firing

guide, sear and firing pin. Re-

 

pin.

place worn or damaged

 

 

parts. Notice: Do not attempt

 

 

to clean power load strip

 

 

channel with wire brush. You

 

 

may damage tool.

 

 

 

Opening and clos-

Lack of proper cleaning.

Inspect and clean complete

ing of barrel or

 

tool. Replace worn or dam-

pushing down on

 

aged parts. Notice: Do not

tool, etc. is not

 

attempt to clean power load

smooth but is

 

strip channel with wire brush.

rough or binds.

 

You may damage tool.

 

 

 

105635

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model Powder Actuated ToolIndex Before Using Safety Precautions Handling the ToolPowe Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Plastic Flute Why a Power Fastener Holds WHY a Power Fastener Holds in ConcreteSelecting Power Fasteners and Power loads OverdriveOperation Operation Parts List 496 Key Part DescriptionCleaning and Maintenance Tool Disassembly Removing Barrel AssemblyRemoving Rear PAD and Handle PAD Assembly Removing Rocker ARM AssemblyRemoving Trigger Assembly Removing Outer Liner Assembly from HousingRemoving Firing PIN Tool Assembly Inserting Outer Liner Assembly Into HousingAttaching Trigger Assembly to Housing Attaching Firing PIN AssemblyAttaching Rear PAD and Handle PAD Assembly Assembling Barrel AssemblyReplacing Stop Troubleshooting Guide Problem Possible Cause RemedyParts Centrals FastenersSP Fasteners Application Chart For fastening this To thisMaintenance Log Limited Warranty Agreement A. only

496 specifications

Desa 496 is an innovative and versatile solution designed to meet the demands of modern living. This breakthrough development focuses on enhancing the quality of life through advanced technologies while ensuring environmental sustainability.

One of the main features of Desa 496 is its smart home integration. Each unit is equipped with IoT devices that allow residents to control lighting, heating, and security systems from their smartphones. This integration not only provides convenience but also optimizes energy usage, leading to significant cost savings over time. Energy-efficient appliances are standard, promoting a greener lifestyle throughout the community.

Another notable characteristic of Desa 496 is its commitment to sustainability. The development features green roofs that not only improve insulation but also contribute to urban biodiversity. Rainwater harvesting systems are employed to minimize water wastage and reduce the overall ecological footprint of the community. These systems capture rainwater for irrigation and greywater uses, further enhancing the sustainability of the environment.

Desa 496 is also designed with communal spaces that foster a sense of community among residents. Parks, gardens, and recreational areas are strategically placed throughout the development, encouraging outdoor activities and social interactions. These communal spaces are enhanced with the use of smart technology, such as lighting systems that adjust based on the time of day, ensuring safety and comfort for all users.

The architecture and design of Desa 496 emphasize natural light and open spaces, with large windows and well-planned layouts that create a sense of openness. The use of sustainable materials in construction further complements the development's commitment to environmental responsibility.

Security is a priority in Desa 496, with advanced surveillance systems and controlled access points that ensure the safety of all residents. Smart sensors are integrated into the infrastructure, enabling real-time monitoring and alerts in case of any security breaches.

In conclusion, Desa 496 is not just a residential development; it is a forward-thinking community that leverages technology to enhance the quality of life while prioritizing sustainability and safety. Its innovative features make it a benchmark for future urban living, proving that luxury and ecological responsibility can go hand in hand.
Top Page Image Contents