Chicago Electric 46804 Grounding, Grounded Tools Tools with Three Prong Plugs

Page 7

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric

shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by

a service facility before use. If the plug will not fit the outlet, have a proper

outlet installed by a qualified electrician.

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of elec- tric shock. (See Figure A.)

2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.)

3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.)

FIGURE A

SKU 46804 For technical questions, please call 1-800-444-3353.

Page 7

Image 7
Contents Single SPEED, Electric Drill For technical questions and replacement parts, please callWork Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesPage Grounded Tools Tools with Three Prong Plugs GroundingSee Figure C Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure C, nextExtension Cord Length SymbologyOperating Instructions UnpackingOperating Instructions To Install Bits See on page ten and belowPlastic and plastic coated chipboard INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Parts ListAssembly Diagram