Chicago Electric 45338 operating instructions Symbology, 25’ 50’ 75’ 100’ 150’

Page 8

dition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

0 – 2.0

2.1– 3.4

3.5– 5.0

5.1– 7.0

7.1– 12.0

12.1– 16.0

16.1– 20.0

TABLE A

EXTENSION CORD

LENGTH

25’	50’	75’	100’	150’
18	18	18	18	16
18	18	18	16	14
18	18	16	14	12
18	16	14	12	12
18	14	12	10	-
14	12	10	-	-
12	10	-	-	-

*Based on limiting the line voltage drop to five volts at

150% of the rated amperes.

Symbology

Double Insulated

	Canadian Standards Association

	Underwriters Laboratories, Inc.

V~	Volts Alternating Current
A	Amperes
	Amperes

n0 xxxx/min.	No Load Revolutions per Minute
n0 xxxx/min.	(RPM)

SKU 45338

For technical questions, please call 1-800-444-3353.

Page 8

Image 8

Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsFor technical questions, please call General Power Tool SafetySave This Manual Personal safety Drill and Impact Drill Safety Vibration Safety Grounding Grounded Tools Tools with Three Prong PlugsDouble Insulated Tools Tools With Two Prong Plugs Extension CordsSymbology 25’ 50’ 75’ 100’ 150’SpecificationsAssembly UnpackingInstructions for putting into use Operating InstructionsGeneral Operating Instructions Tool Set UpWork Piece and Work Area Set Up SKU For technical questions, please call Figure F top viewMaintenance Servicing Cleaning, Maintenance, LubricationParts List Part Description QtyRecord Product’s Serial Number Here Limited 90 DAY Warranty