Delta DP350 instruction manual Variable Speed Control, Drilling Holes to Depth, Quill Adjustments

Page 12

VARIABLE SPEED CONTROL

To avoid damaging the drive belts and pulleys, DO NOT turn speed control handles (A) Fig. 24, unless motor is running. The pilot wheel handles (A) are turned clockwise to increase speed and counterclockwise to decrease speed. The speed range is 500 rpm to 3100 rpm.

DRILLING HOLES TO DEPTH

Where a number of holes are to be drilled to exactly the same depth, the stop nut (A) Fig. 25, on the threaded stop rod (B) is used as follows:

DISCONNECT MACHINE FROM POWER SOURCE.

1.Insert bit into chuck.

2.Lower the chuck (C) Fig. 25, to the depth you wish the holes to be drilled. Then lock the quill in position by tightening quill locking lever (E). NOTE: Quill locking lever (E) is spring-loaded and can be repositioned by pulling out on the handle and repositioning the hub of the handle on the bolt located underneath the hub.

3.Depress spring-loaded button (F) Fig. 25, and rapidly move stop nut (A) until bottom of nut (A) contacts stop

(G). Then hold the pinion shaft handle and loosen quill locking lever (E), the chuck and quill will return to the up position by gradually allowing the pinon shaft handles to rotate to the return position.

4.Place the material to be drilled on the drill press table. Raise the drill press table until the material to be drilled just touches the drill bit.

5.Drill a test hole to check the depth and readjust if necessary by rotating stop nut (A) Fig. 25, for fine ad- justment. It is not necessary to depress button (F) while rotating stop nut (A) for fine adjustment.

QUILL ADJUSTMENTS

The spindle is raised and lowered by means of the pilot wheel (A) Fig. 26. The quill (B) can be locked at any desired point in its travel by tightening the quill locking lever (C). NOTE: The quill locking lever (C) is spring- loaded and the handle can be repositioned by pulling out on the handle (C) and repositioning the hub (D) of the handle on the bolt located underneath the hub.

A

A

Fig. 24

A F

G

E

C

Fig. 25

D

A

BC

Fig. 26

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Variable Speed Drill Press Safety Guidelines / Definitions General Safety RulesAdditional Safety Rules for Drill Presses Refer to them often Use them to instruct othersPower Connections Unpacking and Cleaning Extension CordsDrill Press Parts Assembly Being Careful not to Overtighten Page Operating Controls and Adjustments Locking Switch OFF PositionFastening Drill Press to Supporting Surface Starting and Stopping Drill PressTable Adjustments Flexible LampQuill Adjustments Variable Speed ControlDrilling Holes to Depth Adjusting Spindle Return Spring OperationInstalling and Removing Drill Bits Correct Drilling SpeedsBoring in Wood Drilling MetalMaintenance LubricationAccessories Canadian PORTER-CABLE Delta Service Centers

DP350 specifications

The Delta DP350 is a powerful and versatile device known for its robust features and advanced technologies, making it an ideal choice for various applications in both commercial and industrial settings. With its sleek design and user-friendly interface, the DP350 stands out as a reliable solution for professionals seeking efficiency and performance.

One of the main features of the Delta DP350 is its impressive power output capabilities. Designed for demanding applications, it offers a robust wattage rating that ensures it can handle heavy loads and operate various devices seamlessly. This power output is complemented by its energy efficiency, minimizing operational costs while maximizing productivity.

The device incorporates cutting-edge technologies, including a state-of-the-art digital control system. This system allows for precise monitoring and adjustment of power parameters, ensuring optimal performance under varying load conditions. Additionally, the DP350 features an advanced cooling mechanism, which enables it to operate continuously without overheating, thereby extending its lifespan and reliability in critical environments.

Another noteworthy characteristic of the Delta DP350 is its extensive connectivity options. It supports multiple communication protocols, enabling seamless integration with other systems and devices. This flexibility is essential for modern setups where interoperability is crucial. Furthermore, the DP350 is equipped with smart grid technology, making it compatible with renewable energy systems, which aligns with the growing trend toward sustainability.

Safety is a paramount concern with the Delta DP350, which comes with comprehensive protection features. These include overload protection, short-circuit prevention, and thermal protection, ensuring that the device operates safely under all conditions. Additionally, the user-friendly display provides real-time information on operational status, making it easy for users to monitor performance at a glance.

The Delta DP350 is also designed for durability and resilience in harsh environments, with a robust casing that can withstand external factors such as dust and moisture. This makes it suitable for a variety of industrial applications, from manufacturing to telecommunications.

In summary, the Delta DP350 combines power, efficiency, and advanced technology in a user-friendly package. Its impressive features, including digital control, extensive connectivity, and reliable safety measures, make it an excellent choice for professionals looking to enhance their operations. Whether for industrial use or commercial applications, the DP350 delivers the performance and reliability needed to succeed in a competitive landscape.
Top Page Image Contents