GROUNDED OUTLET BOX
CURRENT
CARRYING
PRONGS
GROUNDING BLADE
IS LONGEST OF THE 3 BLADES
Fig. A
GROUNDED OUTLET BOX
GROUNDING
MEANS
ADAPTER
Fig. B
GROUNDED OUTLET BOX 
CURRENT
CARRYING
PRONGS
GROUNDING BLADE
IS LONGEST OF THE 3 BLADES
Fig. C
OPERATING INSTRUCTIONS
EXTENSION CORDS
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which has a 3-prong grounding type plug and a 3-pole receptacle which will accept the tool’s plug. When using an extension cord, be sure to use one heavy enough to carry the current of the saw. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct gauge to use depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heav- ier the cord.
RECOMMENDED EXTENSION CORD SIZES FOR USE
WITH STATIONARY ELECTRIC TOOLS
Fig. D
FOREWORD
The Delta Model 70-200 Drill Press provides production capacity drilling and includes; 1 hp single phase 115/230 volt induction motor, pulleys, belts, 0 - 5/8 capacity chuck, 45 degree tilt table L/R, rack and pinion table raising mechanism and #3 Morse Taper spindle adaptor. A quick release motor mount makes changing the nine spindle speeds (150, 260, 300, 440, 490, 540, 1150, and 2200 rpm) fast and easy.
