SWITCHLOCK
See Figure 4.
The switch thgger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
SELECTOR
KEYLESS CHUCK
See Figure 5.
Your new drifthas a keyless chuck. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate
the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit.
(RELEASE) CHUCK BODY
DRILL BIT
Loc.), /__/ / |
|
|
| |||
CENTER POSITION |
|
|
|
|
| |
FORWARD | / | _ |
|
|
| |
| SWITCH |
|
|
|
| |
| TRIGGER | Fig. 4 |
|
|
| |
REVERSIBLE |
|
|
| LOCK | CHUCK | |
|
|
|
| |||
See F/gum 4. |
|
|
| (TIGHTEN) | COLLAR | |
This tool has the feature of being reversible. The |
|
| Fig. 5 | |||
direction of rotation is controlled by a selector located |
|
| ||||
|
|
| ||||
above the switch trigger. With the drift held in normal | WARNING: | Do not hold chuck body with one | ||||
|
| _1 | ||||
operating position, the direction of rotation selector | hand and use power of the driit to tighten chuck | |||||
should be positioned to the left of the switch for | ||||||
jaws on drill bits. Chuck body could slip ir_ your | ||||||
ddllthg. The ddlling direction is reversed when the | ||||||
hand or your hand could sfip and come in contact | ||||||
selector is to the right of the switch. When the selector | ||||||
with rotating drift bit. This could cause an | ||||||
is in center position, the switch trigger is locked. | ||||||
accident resulting in sehous personal injury. | ||||||
|
|
| ||||
To stop, release switch trigger and allow the chuck to |
|
|
| |||
come to a complete stop. |
| _k | WARNING: | Battee/tools | are always in | |
|
| |||||
operating condition. Therefore, switch should always be locked when not in use or carrying at your side.