SWITCH
See Figure 2,
TO tum your drill ON, depress the switch tdgger. To turn it OFF, release the switch trigger.
SELECTOR
CENTER PosmoN
(LOCK)
SWITCH |
|
TRIGGER | Fig. 2 |
VARIABLE SPEED
This tool has a vadable speed switch that delivers higher speed and torque with increased tdgger pressure. Speed is controlled by the amount of switch trigger depression.
Note: You might hear a whistling or ringing noise from
the switch during use. DO not be concerned, this is a normal part of the switch function.
TO INSTALL BATTERY PACK
•Lock switch tdgger on your drill by placing the direction of rotation selector in center position. See Figure 2.
•Place battery pack in your drill, Align raised rib inside ddll with groove on battery pack. See Figure 3,
DE | HES |
TO RELEASE |
|
BATrlENT PACK | Fig. 3 |
•Make sure the latches on each side of your battery pack snap in place and battery pack Is secured in dhll before beginning operation.
_ CAU'rlON: When placing battery pack in your ddll, be sure raised r_b inside ddll aligns with
groove on battery pack and latches snap in place properly. Improper assembly of battery pack can cause damage to intema_ components.
TO REMOVE BATTERY PACK
•Lock sw_tch trigger on your ddll by placing the direction of rotation selector in center position. See Figure 2.
•Locate latches on end of battery pack and depress to rsiease battery pack from your drill.
See Figure 3.
•Remove battery pack from your drill.