Remington 490, 489 operating instructions Plastic Flute

Page 11

Safety Precautions

G 018

6.Power fasteners are a permanently installed fixture. An act of demolition is required for their removal. Appropriate safety precautions must be taken.

Head

Shank

Plastic Flute

482-59

7.NEVER use common nails or other materials as fasteners. Remington® Power Fasteners are manufactured from special steel and heat treated to produce a very hard yet ductile fastener.

G 018

8.NEVER pry a powder load out of the chamber. Prying can discharge the load causing serious injury (see Trouble- shooting Guide on pages 20 and 21).

	LOAD		UNLOAD
1	2	2	1
	REMINGTON		REMINGTON
	489-36		489-37
			489-37

9.ALWAYS insert the power fastener first, then the powder load. If work is interrupted for any reason, ALWAYS remove the powder load before removing the power fastener (see page 15, item 7).

101274

11

Image 11

Contents Operating Instructions Index ? ? PrecautionsHandling the Tool Safety Precautions489-22 Know Your Fastening Base Material 489-27 Operating the Tool Powder Loads and Fasteners Never use powder loads in firearms Plastic Flute WHY a Power Fastener Holds in Steel Why a Power Fastener HoldsWHY a Power Fastener Holds Concrete Fastening Into Steel Selecting Power Fasteners Powder LoadsOverdriven Power Fasteners and Piston Fastening Into ConcreteOperation 90˚ Accessories Parts ListBarrel Replacement Barrel Replacement Contiued Tool Assembly Tool DisassemblyProblem Possible Remedy Cause Troubleshooting GuideOther types of loads will cause load-ejection problems Repair Service Technical ServiceFBD Parts CentralsPowder load and power fastener application information Application ChartLoad Color Code Stock 101274 101274 A. only Limited Warranty Agreement