Remington 490, 489 operating instructions Other types of loads will cause load-ejection problems

Page 21

Troubleshooting Guide

PROBLEM		POSSIBLE	REMEDY
PROBLEM		CAUSE	REMEDY

Tool does	not	Dirt build-up on	Check firing pin indenta-
fire.		breech not allow-	tion on cartridge. Clean
		ing proper penetra-	breech, breech face, sear
		tion of firing pin.	and firing pin. Replace
			worn or damaged parts.

Opening	and	Lack of proper	Inspect and clean com-
closing of barrel		cleaning.	plete tool. Replace worn
orpushingdown			or damaged parts.
on the tool, etc.
isnotsmoothbut
isroughorbinds.

Fasteners

SP

SPW

SP FASTENERS

482-79
Wood or Non-Metals	Wood or Non-Metals
To Steel	To Concrete

Fasten wood or non-metals to concrete or steel.

IMPORTANT

This tool is designed to use .22 caliber neck-down crimped loads, power levels 1 (gray) through 4 (yellow).

5/8"

G 018

Neck-Down Crimped Load Straight Wadded Load

CAUTION: Do not use any load other than the .22 caliber neck-down crimped load.

Other types of loads will cause load-ejection problems.

101274

21

Image 21

Contents Operating Instructions Index ? ? PrecautionsHandling the Tool Safety Precautions489-22 Know Your Fastening Base Material 489-27 Operating the Tool Powder Loads and Fasteners Never use powder loads in firearms Plastic Flute Why a Power Fastener Holds WHY a Power Fastener Holds ConcreteWHY a Power Fastener Holds in Steel Overdriven Power Fasteners and Piston Selecting Power Fasteners Powder LoadsFastening Into Concrete Fastening Into SteelOperation 90˚ Accessories Parts ListBarrel Replacement Barrel Replacement Contiued Tool Assembly Tool DisassemblyProblem Possible Remedy Cause Troubleshooting GuideOther types of loads will cause load-ejection problems Repair Service Technical ServiceFBD Parts CentralsPowder load and power fastener application information Application ChartLoad Color Code Stock 101274 101274 A. only Limited Warranty Agreement