Safety Precautions
30
WATER
2.Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds. Release the trigger and remove pressure on the tool while holding the muzzle against the work surface. Again press the tool firmly against the work surface and pull the trigger. If the tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before unloading and carefully dis- carding the misfired powder load into water or oil.
G 018
Spall Shield
3.ALWAYS use the spall shield when driving directly into concrete or steel. ALWAYS wear eye protection.
GASOLINE
| OLINE |
G 018 | |
|
4.NEVER use a powder actuated tool in an explosive or flammable atmosphere or when non sparking tools are required.
POWDER LOADS AND FASTENERS
G 018
POWDER LOADSG 018
1.NEVER leave unfired powder loads on floors or work surfaces.
101274 | 9 | Continued |