NETGEAR FVS318 manual Check the setup

Page 9

Check the setup

•The Test light turns on for a few seconds and then goes off.

Note: If the Test light remains on for more than one minute, go to Troubleshooting on page 13.

•The Power and Internet Link lights should be lit.

•If your computer is on, the Local Link light should be on for the port number that your computer is connected to.

Note: If the Local port connection is a 100 Mbps connection, the 100 light should be on.

If either the Power, Internet, or port Link light isn’t lit, go to Troubleshooting on page 13.

7

Image 9

Contents Installation Guide Technical Support Introduction Installation OverviewWhat’s in the Box Your Working Connection to the Internet Gather Configuration Information forConnection information Host and Domain Names Login NameFixed or static IP address DNS server address informationInstall the Firewall Check the setup Windows Operating System Firewall and Restart the NetworkMacintosh Operating System Linux or Unix Operating SystemRestarting the Network Test the Connection ConnectionComputers Optional VPN Connections Internet ServicesNo lights are lit on the firewall TroubleshootingTest light doesn’t turn off Internet Link light doesn’t light upCannot get onto the Internet with a computer Resetting TCP/IP Properties Windows Glossary of Terms Firewall Specifications Environmental SpecificationsFirewall System Requirements Voluntary Control Council for Interference Vcci Statement

Related manuals

Manual 2 pages 63.65 Kb