Cisco Systems OL-6217-01 manual Define each WDS-host as a network access server NAS

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

•Define each WDS-host as a network access server (NAS)

•Define credentials to be used by infrastructure access points for authentication

•To define each WDS-host as a NAS on the CiscoSecure ACS, follow these steps:

Step 1 Log into the CiscoSecure ACS server.

Step 2 Select Network Configuration from the menu on the left-hand side (see Figure 5).

Step 3 Under the AAA Clients section, select Add Entry (see Figure 5).

Figure 5 CiscoSecure ACS NAS Setup

Step 4 Complete the form by entering a) the WDS-host device host name in the AAA Client Hostname field, b) the WDS-host IP address in the AAA Client Address field, and (c) a RADIUS shared secret in the Key field.

Note The key value is entered later on each WDS-host device.

Step 5 Select RADIUS (Cisco Aironet) in the Authenticate Using selection menu.

Step 6 Select the desired RADIUS logging options.

Step 7 Click Submit or Submit + Restart (see Figure 6).

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

OL-6217-01 15