Cisco Systems OL-6217-01 Adding Username and Password Credentials, CiscoSecure ACS NAS Setup

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

Figure 6 CiscoSecure ACS NAS Setup

Step 8 Repeat Steps 2 through 7 for each WDS-host device.

Step 9 Restart the CiscoSecure ACS service by selecting Submit + Restart after completing the tasks through Step 7. Or you can select System Configuration on the left-hand side menu, then Service Control, and then Restart.

Adding Username and Password Credentials

Each infrastructure access point presents a username and password to the WDS when it authenticates. These credentials must be defined on the CiscoSecure ACS and do not have to be unique per infrastructure access point. Most implementations use a single username and password credential pair for all of the infrastructure access points. To add the username and password credentials into the CiscoSecure ACS, follow these steps:

Step 1 Log into the CiscoSecure ACS server.

Step 2 Select User Setup on the left-hand side menu (see Figure 7).

Step 3 Enter a username in the User field, then select Add/Edit (see Figure 7).

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

16 OL-6217-01