Cisco Systems OL-6217-01 manual Log into the CiscoWorks WLSE

Models: OL-6217-01

1 38
Download 38 pages 11.63 Kb
Page 19
Image 19
Step 1 Log into the CiscoWorks WLSE.

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

To configure the necessary credentials on the CiscoWorks WLSE follow these steps:

Step 1 Log into the CiscoWorks WLSE.

Step 2 Navigate to Devices > Discover. Select Device Credentials on the left-hand side table of contents (see Figure 9).

Step 3 Select SNMP Communities on the left-hand side table of contents (see Figure 9).

Step 4 In the form, enter the appropriate SNMP credentials. Consult the CiscoWorks WLSE online-help for details on SNMP credential entry syntax.

Figure 9 CiscoWorks WLSE SNMP Community Entry Screen

Step 5 Select Device Credentials > Telnet/SSH User/Password from the table of contents on the left-hand side (see Figure 10).

Step 6 Enter the appropriate Telnet or SSH credentials for logging in to the managed access points for configuration (see Figure 10). Consult the CiscoWorks WLSE online help for details on Telnet or SSH credentials entry syntax.

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

 

OL-6217-01

19

 

 

 

Page 19
Image 19
Cisco Systems OL-6217-01 manual Log into the CiscoWorks WLSE