Switch-Based WDS Solution Configuration | Cisco Systems OL-6217-01

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

Validating the Configuration

The IOS command line on the WDS host can be used to validate the configurations. To validate the WDS configuration, enter this command:

show wlccp wds ap

All of the registered access points and infrastructure access points are listed. For example:

wds-ap#show wlccp wds ap

MAC-ADDR IP-ADDR STATE LIFETIME 000d.28f2.33ea 10.1.12.19 REGISTERED 171 000d.28f2.3426 10.1.12.23 REGISTERED 173 000d.28f2.3436 10.1.12.22 REGISTERED 183 000c.8576.326e 10.1.12.18 REGISTERED 497

To validate that the CiscoWorks WLSE is correctly registered, enter this command:

show wlccp wnm status

The CiscoWorks WLSE IP address is listed, and “Security Keys Setup" appears in the Status field.

wds-ap#show wlccp wnm status

WNM IP Address : 172.20.98.221 Status : SECURITY KEYS SETUP

Switch-Based WDS Solution Configuration

In this section, the configuration tasks required to configure the switch-based WDS solution are covered. These tasks include the following:

•Configuring the Catalyst 6500 Supervisor 720

•Configuring the WDS on the WLSM module

•Configuring the infrastructure access point

•Managing the access points with the CiscoWorks WLSE

•Validating the setup

Configuring the Catalyst 6500 Supervisor 720

This section is not an extensive discussion on configuring the Catalyst Supervisor 720 to support the Cisco SWAN switch based WDS solution. This section covers only the basics of configuration. More extensive discussions are available at http://www.cisco.com/go/swan.

The required configuration tasks for the Supervisor 720 are as follows:

•Configure a VLAN between the supervisor and WLSM

•Configure the multi-point GRE tunnel interfaces

•Configure SNMP communities

Follow these steps to complete the tasks:

Step 1 Gain access to the supervisor command-line interface and enter configuration mode.

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

	OL-6217-01	25

Image 25

Cisco Systems OL-6217-01 Switch-Based WDS Solution Configuration, Validating the Configuration, Wds-ap#show wlccp wds ap

Contents

Corporate Headquarters Cisco Aironet 1400 Series Wireless Bridge Deployment Guide N T E N T S Contents Book Title Xxxxx-xx Audience Acroymns and Terms Cisco Swan Framework Overview Cisco Swan Layers Cisco Swan Logical View Shows the access point-based WDS solution WDS Wlccp Cisco Swan Framework Components Hardware Components Software Components Implementing the Cisco Swan Framework Common Tasks CiscoSecure ACS NAS Setup Adding Username and Password Credentials CiscoSecure ACS User Setup AAA-apconfig-radsrvuser username password password AAA-apconfig#radius-server local CiscoWorks Wlse Snmp Community Entry Screen CiscoWorks Wlse Telnet/SSH Credentials Entry Configuring the WDS Access Point Access Point-Based WDS Solution Configuration Wds-apconfig#username username password password Wds-apconfig#hostname hostname Wds-apconfig#wlccp wds priority priority number Configuring the Infrastructure Access PointWds-apconfig#wlccp wnm ip address wlse ip address Infra-apconfig#hostname hostname Managing the Access Points with the CiscoWorks WlseInfra-apconfig#username username password password Infra-apconfig-line#access-class access-list number Validating the Configuration Switch-Based WDS Solution ConfigurationConfiguring the Catalyst 6500 Supervisor Wds-ap#show wlccp wds ap Create the Vlan between the supervisor and Wlsm Configuring the WDS on the Wlsm Wlsmconfig#hostname hostname Wlsmconfig#snmp-server view iso iso included Wlsmconfig# wlccp wnm ip address wlse ip address Configuring the Infrastructure Access PointsInfra-apconfig#wlccp ap wds ip address wlsm ip address Wlsm# show wlccp wds ap Validating the SetupWlsm# show wlccp wnm status Mobility ap Sup720# show mobility status Fast Secure Roaming with Cckm Infra-apconfig#interface dot11Radio When Using Multiple Encryption Types or VLANsInfra-apconfig-if#encryption mode ciphers cipher-type Infra-apconfig-if-ssid#authentication network-eap eap-group Click Profile Management Configuring ACU to use Cckm Cisco Swan Framework Radio Management Cisco Swan Radio Management Features Building Tool Pop-Up Window Preparing to Use Cisco Swan Radio Management Cisco Swan Radio Management Features Page OL-6217-01