Setting the time and date

The current time and date are shown on the display when the machine is on and ready for use (standby mode). The time and date are printed on all faxes you send.

Note: If power to the machine is cut off for over 30 minutes, when power is restored, the machine prompts you to reset the time and date.

1.Press Setup. The display shows the first setup menu; FAX NUMBER/NAME.

2.Press ➛or until ‘TIME/DATE SETUP’ appears, then press

Start/Enter. The display asks you to choose a date format.

3.Press Start/Enter.

4.Press ➛or until you find the desired date format, then press

Start/Enter.

If you select USA, the time and date appears in the order of month, day, then year. The EUROPE format will be displayed in the order of day, month, then year.

The display shows the currently set time and date using the selected date format.

25-06-2002 12:30

(‘Europe’ type)

 

 

5. Enter the correct time and date using the number keypad.

Day

= 01~31

Month

= 01~12

Year

= four digits

Hour

= 00~23

Minute

= 00~59

You can also use or to move the cursor under the digit you want to correct, then enter a new number.

6.Press Start/Enter when the time and date on the display is correct.

If you enter an invalid number, the machine beeps and does not pro- ceed to the next step. If this happens, just reenter the correct number.

The display shows the time and date you have set, then returns to Standby mode.

25-JUN 12:30 FAX

2.7 Getting started

Page 28
Image 28
Samsung SF-515 manual Setting the time and date, Press or ❿ until ‘TIME/DATE SETUP’ appears, then press