Yamaha HTR-5630RDS Basic System Settings, Using the basic menu, Exit, Basic Menu, Setup, Sp Level

BASIC SYSTEM SETTINGS

The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND” menu instead of those under the “BASIC” menu (See page 40). Altering any parameters in the BASIC menu will reset all parameters in the “SOUND” menu.

Using the basic menu

Use the remote control to make adjustments.

•Press SPEAKERS A/B on the front panel to select the main speakers you want to use, and set SPEAKERS ON/OFF to the ON position.

•Make sure you disconnect headphones from this unit.

3 Press u / d to change the display to the setting you want to alter.

SETUP

Changes the speaker and amplifier settings to suit the size of the room you are using. Refer to “Setting the unit to match your speaker system” on page 20 for more information.

SP LEVEL

TEST

PROG

LEVEL

3,6

STEREO

VOLUME

PROG

MUTE

SET MENU

VOLUME

1

2,4

Adjusts the output levels of the speakers.

Refer to “Setting speaker output levels” on page 20 for more information.

4 Press –/+ to enter the desired setting mode.

5 Change the unit settings to suit your listening environment. When you have finished, the unit will automatically return to the basic menu.

1 Press SET MENU.

“BASIC MENU” appears on the front panel display, as shown here.

SET MENU

BASIC MENU

If the front panel display changes to show anything other than “BASIC MENU”, press u until it displays “BASIC MENU”.

2 Press –/+ to enter into the BASIC menu.

The front panel display changes as shown here:

1 SETUP

6 Press u / d to exit from the set menu.

The front panel display changes in the following order:

Exit

↑

BASIC

↓↑

SOUND

↓↑

INPUT

↓↑

OPTION

↓

Exit

18