Connect the main, center and rear speakers (and rear center speaker for NS-P106) to the speaker output terminals of your amplifier with the provided speaker cables.

*The provided speaker cables have labels marked

FRONT L, FRONT R, CENTER, REAR L, REAR R (and REAR C for NS-P106). Connect each speaker cable to the corresponding speaker by following the figure on page 7.

(The speaker cables marked FRONT L/R are used for connecting the main speakers to the MAIN speakers’ terminals on the amplifier.)

*Connect each speaker making sure not to reverse the polarity (+, –). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass.

*For the main and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals.

Connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier.

*To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT terminal of the subwoofer.

*To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both the left L/MONO and right R INPUT terminals of the subwoofer.

Note

When connecting to a monaural line output terminal of the amplifier, connect to the L/MONO INPUT terminal.

How to connect speaker cables

For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the speakers.

Before connecting

Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.

One side of the provided speaker cable has a white broken line and the other side has no line.

Connect the (+) terminals on both the speaker and the amplifier using the side with a white broken line. Connect the (–) terminals on both components using the side with no line.

How to Connect:

1Press and hold the terminal’s tab, as shown in the figure.

2Insert the bare wire.

3Release your finger from the tab to allow it to lock securely on the cable’s wire end.

4Test the firmness of the connection by pulling lightly on the cable at the terminal.

Red: positive (+)

Black: negative (–)

White broken line

Note

Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them.

E-8

Page 69
Image 69
Yamaha HTR-5630RDS owner manual Before connecting, How to Connect

HTR-5630RDS specifications

The Yamaha HTR-5630RDS is a versatile and robust home theater receiver that delivers an exceptional audio experience for movie buffs and music lovers alike. Launched as part of Yamaha's renowned line of audio equipment, this model integrates advanced technologies tailored to enhance both sound quality and usability.

One of the standout features of the HTR-5630RDS is its compatibility with a wide variety of audio formats. It supports Dolby Digital and DTS decoding, which means it can process multi-channel audio signals that create an immersive surround sound experience. Whether you’re watching an action-packed blockbuster or a serene classical concert, this receiver ensures that every sound fills the room and envelops you.

In addition to its decoding capabilities, the HTR-5630RDS boasts a power output of 100 watts per channel, providing ample power for driving a full surround sound speaker system. Its high-current design ensures that it can deliver exceptional performance even with demanding speakers, offering a clear and dynamic soundstage. Moreover, the receiver features multiple audio inputs, including optical and coaxial digital connections as well as analog inputs, allowing you to connect various devices like gaming consoles, Blu-ray players, and streaming devices with ease.

The HTR-5630RDS also comes equipped with Yamaha's proprietary YPAO (Yamaha Parametricroom Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts settings to optimize sound performance based on your specific environment. This means that regardless of where you place your speakers, you can expect balanced and accurate sound reproduction.

For those who enjoy listening to the radio, the HTR-5630RDS includes an RDS (Radio Data System) tuner that provides information about FM radio stations, such as song titles, artist names, and other details. The user-friendly interface makes it easy to navigate through stations and select your favorites, enhancing your listening experience.

With its sleek design and comprehensive feature set, the Yamaha HTR-5630RDS stands out as an excellent choice for anyone looking to build a high-quality home theater system. Its combination of powerful amplification, advanced processing features, and user-friendly setup makes it an ideal addition to any entertainment setup. Whether you're enjoying a movie night with family or hosting a gathering with friends, the Yamaha HTR-5630RDS ensures that your audio experience will be nothing short of extraordinary.