Yamaha HTR-5630RDS owner manual Recording, Special considerations when recording DTS material

RECORDING

Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation .

							VOLUME
STANDBY
/ON
SILENT	SPEAKERS
	STEREO	PROGRAM	A/B/C/D/E	PRESET/TUNING	CONTROL	BASS/TREBLE	INPUT
	EFFECT		NEXT	SET MENU

2

DVD D-TV/CBL VCR POWER

2	CD MD/CD-R V-AUX		6CH IN
	TUNER A/B/C/D/E	PRESET
	/DTS 6.1/5.1	NIGHT	SLEEP

1 Turn on the power of this unit and all connected components.

2 Select the source component you want to record from.

DVD D-TV/CBL VCR

INPUT

CD MD/CD-R V-AUX

or

TUNER

Notes

•Do a test recording before you start an actual recording.

•When this unit is set in standby mode, you cannot record between the components connected to it.

•DSP programs and volume, bass, and treble settings do not affect the recorded material.

•You cannot record from a source connected to the 6CH INPUT jacks on this unit.

•Input sources are not output to the same OUT (REC) channel. (For example, the signal input from VCR IN is not output to VCR OUT.)

•You cannot record audio signals from a source connected to the DIGITAL INPUT jack on this unit because the signals from the DIGITAL INPUT jack and analog input jacks are independent. Please connect a source to the analog in jacks if you wish to record from the analog out jacks.

•Check the copyright laws in your country if you wish to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

■Special considerations when recording

DTS material

The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made.

For LDs, DVDs and CDs encoded with DTS, follow the operating instructions of your player to set it to output an analog signal, if it is compatible with the DTS format.

Front panel Remote control

3 Start playback (or select a broadcast station) on the source component.

4 Start recording on the recording component.

38