Yamaha HTR-5630RDS owner manual USING THE SUBWOOFER SW-P130,  Controls and their functions

USING THE SUBWOOFER (SW-P130)

Controls and their functions

SUBWOOFER SYSTEM YST SW005

1

Port

POWER

ON

2

OFF

3

110V-120V VOLTAGE

Front panel

Rear panel

VOLUME
0	10
AUTO
STANDBY
HIGH
LOW
OFF
INPUT	/MONO
POWER
ON
OFF

VOLUME

6

0 10

AUTO

STANDBY

4HIGH LOW

OFF

5 INPUT /MONO

220V-240V

SELECTOR

220V-240V	VOLTAGE
	SELECTOR
110V-120V

1Power indicator

Lights up GREEN when the POWER switch (2) is pressed in to the ON position and goes off when set to the OFF position.

*Standby mode

If the POWER switch (2) is pressed in to the ON position and the AUTO STANDBY switch (4) is set to the HIGH or LOW position, this indicator lights up RED when no signal is received by the subwoofer.

2POWER switch

Press this switch to the ON position to turn on the

power of the subwoofer. When the power of the subwoofer is on, the power indicator (1) on the front panel lights up GREEN. Press this switch again to set to the OFF position to turn off the power of the subwoofer.

3VOLTAGE SELECTOR switch

(For China, Korean and General models)

If the preset setting of the switch is incorrect, set the switch to the proper voltage range (220V-240V or 110V-120V) of your area.

Consult your dealer if you are unsure of the correct setting.

WARNING

Be sure to unplug the subwoofer before setting the VOLTAGE SELECTOR switch correctly.

4AUTO STANDBY (HIGH/LOW/OFF) switch

This switch is originally set to the OFF position. By setting this switch to the HIGH or LOW position, the subwoofer’s automatic power-switching function operates as explained on page 10. If you do not need this function, set to the OFF position.

*Make sure to change the setting of this switch only when the POWER switch (2) is in the OFF position.

5INPUT terminals

Used to input line level signals from the amplifier.

6VOLUME control

Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume.

E-9