Hdd の状態確認, 仮想ディスクの作成手動

MD 3000 Modular Disk Storage Manager (Linux 版)

4.4HDD の状態確認

＜全てのHDDの状態確認＞

>SMcli -n <ｽﾄﾚｰｼﾞｱﾚｲ名> -c "show allPhysicalDisks;"

＜指定した HDD の状態確認＞

>SMcli -n<ｽﾄﾚｰｼﾞｱﾚｲ名> -c "show physicaldisks [ｴﾝｸﾛｰｼﾞｬ ID,ｽﾛｯﾄ ID];"

例）

SMcli -n md3000 -n "show physicaldisks [0,14];"

Performing syntax check...

Syntax check complete.

Executing script...

Physical Disk at Enclosure 0, Slot 14

Status: Optimal

Mode: Hot spare standby

Raw capacity:	68.366 GB
Usable capacity:	67.866 GB
World-wide identifier: 50:00:00:e0:13:9f:48:10
Associated disk group:	None
Physical Disk path redundancy: OK
Physical Disk type:	Serial Attached SCSI (SAS)
Speed:	15000 RPM
Current data rate:	3 Gbps
Product ID:	MAX3073RC
Firmware version:	D206
Serial number:	DQA3P6C04BRV
Vendor:	FUJITSU
Date of manufacture:	Not available

Script execution complete.

SMcli completed successfully.

4.5仮想ディスクの作成(手動)

>SMcli -n <ｽﾄﾚｰｼﾞｱﾚｲ名> -c "create virtualDisk physicalDisks=(ｴﾝｸﾛｰｼﾞｬID0,

ｽﾛｯﾄID0…ｴﾝｸﾛｰｼﾞｬIDn,ｽﾛｯﾄIDn) raidLevel=<RAIDﾚﾍﾞﾙ> USerLabel="仮想ﾃﾞｨｽｸ名" capacity=<仮想ﾃﾞｨｽｸの容量> owner=<優先ｴﾝｸﾛｰｼﾞｬID>;"

例）

#SMcli -n md3000 -c "create virtualDisk physicalDisks=(1,8 1,9 1,10) raidLevel=5 UserLabel=¥"testvol¥" capacity=1 GB owner=0;" Performing syntax check...

Syntax check complete.

Executing script...

Script execution complete.

SMcli completed successfully.