Know Your Crosshair Laser Level, Adjustment Knobs

FEATURES

	TRIPOD ADAPTOR
	and adaptor	ROUGH SURFACE
	storage
		ADAPTOR

PUSH PIN		PUSH PIN
and pin
		HOLES
storage

HOOK-AND-LOOP

STRAP

LOOPS

MULTI-FUNCTION

BASE

Fig. 2

KNOW YOUR CROSSHAIR LASER LEVEL

See Figures 1 - 2.

The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all oper- ating features and safety rules.

ADJUSTMENT KNOBS

The rotational and line height adjustment knobs are used to fine tune your laser line settings.

AIRGRIP VACUUM TECHNOLOGY

This product uses a vacuum base that can adhere to smooth surfaces. Using the vacuum seal prevents wall damage caused by nails or adhesive tape. The vacuum base also features a 5/8 in. - 20 tripod mount.

HOOK-AND-LOOP STRAP

The hook-and-loop strap can be used to attach the unit to a variety of irregularly shaped surfaces.

LASER HOUSING

The laser housing on your level rotates to allow for 360˚ of laser line coverage.

LASER POWER/MODE SELECTOR

The laser power/mode selector is used to select one of three available operating modes — horizontal mode, vertical mode, or crosshair mode.

MULTI-FUNCTION BASE

The multi-function base allows the laser level to be used on irregularly shaped walls or objects. It features built-in loops for a hook-and-loop strap, angled holes for push pins, and storage compartments for the push pins and the 1/4 in. tripod adaptor. The base also protects the unit when using on a dusty or dirty surface and during storage.

ROUGH SURFACE ADAPTOR

The rough surface adaptor increases the number of surfaces on which the AIRgrip vacuum can be used.

VACUUM BASE ON/OFF BUTTON

The vacuum base of your laser level conveniently turns on and off at the touch of a button.