ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Crosshair Laser Level | |
AA Batteries (4) | Tripod Adaptor |
Rough Surface Adaptor | Case |
Operator’s Manual | |
Push Pins (2) |
|
WARNING:
If any parts are damaged or missing do not operate this product. Please return to the place of purchase or call
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
OPERATION
WARNING:
Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
battery cover 
plate
AA batteries
Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
Aligning multiple pictures on a wall
Aligning wallpaper borders or chair rails
Lining up floor or wall tile
INSTALLING BATTERIES
See Figures 3 - 4.
There are two battery compartments for the laser level, one for the AIRgrip vacuum and one for the laser.
To install batteries for the AIRgrip vacuum:
Locate the battery compartment on the base of the laser level and remove the battery cover plate.
Fig. 3
Install two AA batteries according to polarity indicators
(+ or −) inside the battery compartment.
Reinstall the battery cover plate.
To install batteries for the laser:
Rotate the line height adjustment knob to raise the laser lens housing to its highest position.