Ryobi P420 manual Features, Product Specifications

Page 8

FEATURES

PRODUCT SPECIFICATIONS

Grinding Wheel Capacity	.......................................4-1/2 in.	Spindle Thread	5/8 x 11 UNC
Motor	18 Volt DC	Charger Input	120 V, 60 Hz, AC only
No Load Speed	6,500 r/min. (RPM)	Charge Rate	1 hour
		LOCK-OFF BUTTON
	SWITCH TRIGGER

SPINDLE LOCK

ROTATING FOOT

TOOLLESS GUARD

SIDE HANDLE

WRENCH

STORAGE SLOT

DISC FLANGE	WRENCH

GRINDING WHEEL

CLAMP NUT

Fig. 1

8

Image 8

Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules ServiceImportant Safety Instructions Safety Rules for ChargerSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Features Product SpecificationsAssembly Charging the Battery Pack OperationAttaching the Side Handle ApplicationsCharging a Cool Battery Pack Charging a HOT Battery PackSwitch Trigger To Install Battery PackTo Remove Battery Pack Installing Grinding Wheel Positioning the Guard See Figures 7Operating the Grinder To operate the grinderMaintenance General MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesReplacing the Guard Clamp NUT Grinding Wheel Disc Flange To Tighten2 in., 18 Volt Angle Grinder