Ryobi SGL1150 specifications Save this Manual for Future Reference

Page 1

OPERATOR'S MANUAL

4-1/2 in. (115 mm) Angle Grinder Model SGL1150 / Double

SPECIFICATIONS:

Grinding Wheel Capacity	4-1/2 in. (115 mm)
Spindle Thread Size	5/8-11 UNC

Rating	120 volts, 60 Hz, AC

No Load Speed	11,000 RPM

Amperes	6.6 Amperes

Net Weight	4.0 lbs. (1.8 kg.)

THANK YOU FOR BUYING A RYOBI ANGLE GRINDER.

Your new angle grinder has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new angle grinder.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your grinder properly and only for what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so that we can be of future service to you.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Contents Thank YOU for Buying a Ryobi Angle Grinder Save this Manual for Future ReferenceSGL1150 Angle Grinder Typical ApplicationWork Area General Safety RulesRules for Safe Operation Specific Safety Rules for GrindersFeatures SymbolsSymbol Name DESIGNATION/EXPLANATION Unpacking Rules for Safe Operation for GrindersPacking List Know Your Angle Grinder Trigger Switch with LOCK-ON FeatureSpindle Lock Button Heavy Duty MotorInstalling the Side Handle AdjustmentsInstalling the Grinding Wheel Guard Location OperationIncorrect Location of Guard LOCK-ON Feature SwitchLOCK-ON Button Trigger Switch GrindingGuard Replacement MaintenanceClamp Screw Spindle Bearing CAP Flats Lubrication GeneralDouble Insulation Ryobi TECHNOLOGIES, INC 2 in mm Angle Grinder Model SGL1150