ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
WARNING:
Always disconnect the bench grinder from the power source before performing any assembly. Failure to do so could result in accidental starting resulting in possible serious personal injury.
MOUNTING SAFETY SHIELD ASSEMBLY
See Figure 5.
nFasten the safety shield assemblies to the safety shield brackets using the fastening knob and small washer.
NOTE: The slotted part of the safety shield bracket must face towards the grinding wheel guard.
nAttach the safety shield assembly and bracket to the wheel guard using a washer, lock washer and rear shield bracket knob.
WARNING:
Always spin the wheel by hand before turning on the grinder to make sure the spark deflector doesn’t hit the grinding wheel.
SMALL | SMALL | |
WASHER | ||
KNOB | ||
| ||
| SHIELD BRACKET | |
WASHER | (RIGHT) | |
|
LOCK
WASHER
REAR SHIELD
BRACKET KNOB
SAFETY SHIELD
(RIGHT)
Fig. 5
11