OPERATION
WARNING:
Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
This product has been designed only for the purposes listed below:
nSharpening drill bits
nSharpening lawn mower blades
nSharpening chisels and flat screwdrivers
BASIC OPERATION
To be efficient and work as designed, your tools should be kept sharp. Dull tools can and will cause accidents.
Bench Grinders are ideal for sharpening tools such as chisels, planer blades, scissors, etc., and for removing rust or corrosion.
WARNING:
Never sharpen or grind anything made of aluminum, brass, or copper.
Grinders remove material rapidly so pressure is the key to efficient grinding.
The proper way to sharpen a tool and avoid overheating is:
nKeep the object in constant motion, moving it at an even pace.
nNever force a tool against the grinding wheel.
nKeep the tool cool by using either the coolant tray or a pan of water.
nThe grinding wheel should rotate “into” the object being sharpened.
NOTE: Excessive pressure may damage the tool, cause the motor to overheat, and prematurely wear down the grinding wheel.
WARNING:
Excessive pressure on a cold wheel may cause the wheel to crack.
USING COOLANT TRAY
See Figure 8.
The
ON/OFF SWITCH
See Figure 8.
The Bench Grinder features a front access On/Off switch for convenience and safety.
OFF
ON
SWITCH | COOLANT |
| TRAY |
Fig. 8
13