TOOLS NEEDED
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:
COMBINATION WRENCH (3) | PHILLIPS SCREWDRIVER |
7 mm, 10 mm, and 12 mm | ADJUSTABLE WRENCH |
Fig. 3
LOOSE PARTS
The following items are included with your Bench Grinder: | |
n Shield Bracket – one left, one right | 2 |
n Safety Shield Assemblies - left (magnified), right | 2 |
n Work Rest – left (grooved), right | 2 |
n Work Rest Brackets | 2 |
n Fastening Knobs (2 large, 2 medium and 2 small) | 6 |
n Washers (6 mm) | 4 |
n Washers (5 mm) | 2 |
n Lock Washers (6 mm) | 2 |
n Wheel Dresser Tool (Model BGH827 only) | 1 |
n Operator's Manual |
|
WHEEL DRESSING TOOL | RIGHT |
(MODEL BGH827 ONLY) | WORK REST |
LEFT WORK REST | WORK REST | WORK REST |
(GROOVED) | BRACKETLEFT | BRACKET RIGHT |
LOCK WASHER | WASHER | REAR SHIELD | WORK | SAFETY |
|
| BRACKET KNOB | REST KNOB | SHIELD KNOB |
SAFETY SHIELD (LEFT) | SHIELD BRACKET (RIGHT) | SAFETY SHIELD (RIGHT) |
| ||
|
|
SHIELD BRACKET(LEFT)
Fig. 4
WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.
10