SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
V | Volts | Voltage |
A | Amperes | Current |
Hz | Hertz | Frequency (cycles per second) |
W | Watt | Power |
min | Minutes | Time |
| Alternating Current | Type of current |
| Direct Current | Type or a characteristic of current |
no | No Load Speed | Rotational speed, at no load |
| Class II Construction | |
.../min | Per Minute | Revolutions, strokes, surface speed, orbits etc., per minute |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Read The Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
| Eye Protection | Always wear safety goggles or safety glasses with side shields and, |
| as necessary, a full face shield when operating this product. | |
|
| |
| Safety Alert | Precautions that involve your safety. |
| No Hands Symbol | Failure to keep your hands away from the blade will result in serious |
| personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in serious |
| personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in serious |
| personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in serious |
| personal injury. | |
|
| |
| Hot Surface | To reduce the risk of injury or damage, avoid contact with any hot |
| surface. | |
|
|
5