Ryobi R10530 Precautions on Using Your Cordless Tool, Important Safety Instructions for Charger

Page 4

RULES FOR SAFE OPERATION (Continued)

when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents.

9.ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

10.PROTECT YOUR LUNGS. Wear a face mask or dust mask if operation is dusty.

11.PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.

12.SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool.

13.DON'T OVERREACH. Keep proper footing and balance at all times. Do not use on a ladder or unstable support.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

16.AVOID UNINTENTIONAL STARTING. Do not carry the tool with your finger on the switch. Be sure switch is off when installing battery pack.

17.STAY ALERT. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.

18.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this instruction manual.

19.DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized Ryobi Service Center.

20.DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

21.INSPECT FOR and remove all nails from lumber before drilling.

22.DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

PRECAUTIONS ON USING YOUR

CORDLESS TOOL

This product contains Nickel-Cadmium batteries which must be disposed of properly.

1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.

2.First, charge the battery.

3.Be sure the battery is snapped in place.

4.When not in use, lock the switch.

5.When operating at a high place, be aware of things below you.

6.Before drilling into walls, ceilings, or floors, make sure that there are no concealed power cables inside.

WARNING:

Drilling into electrical wiring in walls can cause drill bit and chuck to become electrically live. Do not touch the chuck or metal housing when drilling into a wall; grasp only the insulated handle(s) provided on the tool.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

1.SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for charging the battery with the following components:

MODELBATTERY CHARGER

R1051014006521400666

R1052014006711400656

R1053014006721400667

2.Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) products using battery.

WARNING:

To reduce risk of injury, charge only nickel- cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

3.Do not expose charger to rain or snow.

4.Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operators Manual Cordless DRILL-DRIVER Thank YOU for Buying a Ryobi Cordless DRILL-DRIVERTable of Contents Typical ApplicationsSymbol Meaning Safety Alert Symbol Rules for Safe OperationKnow Your Cordless Tool Read ALL InstructionsPrecautions on Using Your Cordless Tool Important Safety Instructions for ChargerPrecautions Regarding the USE of Charger and Battery Specifications DRILL-DRIVER Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling ChargerOperation Know Your DRILL-DRIVERCharging Your DRILL-DRIVER To ChargeSwitch Switch LockVariable Speed ReversibleTo Install Battery Pack To Remove Battery PackBattery Pack Port Latches Keyless ChuckInstalling and Removing Bits RightRemoving Bits DrillingScrewdriving Torque Adjustment To Adjust TorqueTorque Adjustment Ring To Decrease BIT StorageChuck Removal To Retighten a Loose ChuckSee Figures 13, 14, Mallet Keyless Chuck JawsBatteries MaintenanceOverload Service Model NO. and Serial no

R10510, R10520, R10530 specifications

Ryobi is a renowned brand in the power tool industry, known for its commitment to innovation and quality. Among its diverse range of products, the Ryobi R10530, R10520, and R10510 models stand out for their performance, reliability, and user-friendly features.

The Ryobi R10530 is a versatile tool that excels in a variety of applications. This model is equipped with a powerful motor, delivering impressive performance for both heavy-duty and lighter tasks. One of its key features is the innovative 5-speed control system which allows users to adjust the speed according to task requirements, ensuring optimal precision and efficiency. The R10530 also boasts an ergonomic design, making it comfortable to handle during prolonged use. Additionally, the onboard LED lights enhance visibility, allowing for accurate work even in poorly lit areas.

The Ryobi R10520, on the other hand, focuses on portability and convenience. It is equipped with a compact and lightweight design, making it easy to transport and store. Despite its smaller size, the R10520 does not compromise on power, featuring a robust motor that provides sufficient torque for various applications. One of the standout technologies in this model is the advanced cooling system, preventing overheating during intensive operations, thereby extending the tool’s lifespan. The R10520 also includes a quick-release chuck, enabling fast and easy accessory changes.

Lastly, the Ryobi R10510 is tailored for those seeking a reliable and affordable option without sacrificing quality. This model is characterized by its simplicity and ease of use, making it a great choice for beginners. It features a single-speed motor, suitable for everyday tasks such as drilling and fastening. The R10510 is designed with durability in mind, incorporating high-quality materials that withstand wear and tear. Its compact design also provides great maneuverability, making it an excellent addition to any DIY enthusiast’s toolkit.

In summary, the Ryobi R10530, R10520, and R10510 each bring unique features and technologies to the table. Whether it’s the multi-speed versatility of the R10530, the portable convenience of the R10520, or the straightforward reliability of the R10510, Ryobi offers a suitable option for various users and requirements. With a focus on quality and user experience, these models continue to uphold Ryobi’s reputation as a trusted name in power tools.
Top Page Image Contents