Ryobi R10530, R10510 Operation, Know Your DRILL-DRIVER, Charging Your DRILL-DRIVER, To Charge

Page 7

OPERATION

KNOW YOUR DRILL-DRIVER

See Figures 1 and 2.

Before attempting to use any tool, familiarize yourself with all operating features and safety requirements.

WARNING:

Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

CHARGING YOUR DRILL-DRIVER

The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it prior to use.

Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (drilling followed by re- charging) for them to fully charge.

TO CHARGE

■Charge battery pack only with the charger provided.

■Make sure power supply is normal house voltage, 120 volts, 60 Hz, AC only.

■Connect charger to power supply.

■Place battery pack in charger. See Figure 3. Align raised rib on battery pack with groove in charger.

■Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charger. When properly connected, red light will turn on.

■Normally, the yellow and green lights on the charger will come on. This indicates charger is in control charge mode and should switch to fast charge mode within 5 minutes. When charger is in fast charge mode the red light will come on. If after a period of 15 minutes the yellow and green lights remain on, remove the battery pack, wait 1 minute and reinsert battery pack in charger. If the yellow and green lights continue to remain on an additional 15 minutes, the battery pack is damaged and will not accept charge.

■When your battery pack becomes fully charged, the red light will turn off and the green light will turn on.

■After normal usage, 1 hour of charge time is required to be fully charged. A minimum charge time of 1 to 1-1/2 hours is required to recharge a completely discharged tool.

■The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.

■DO NOT place charger in an area of extreme heat or cold. It will work best at normal room temperature.

TWO SPEED GEAR TRAIN (LO-HI)

TORQUE

 

ADJUSTMENT

 

RING

 

8

BIT

 

7

STORAGE

6

 

5

DIRECTION OF

 

 

ROTATION

SWITCH

SELECTOR

 

KEYLESS TRIGGER

 

CHUCK

 

BATTERY

 

PACK

 

 

Fig. 1

GREEN LIGHT "ON"

BATTERY

INDICATES FULLY

CHARGER

CHARGED

 

 

RED LIGHT "ON"

YELLOW AND GREEN LIGHTS "ON"

INDICATES FAST

CHARGING MODE

INDICATES CONTROL CHARGE OR

 

POSSIBLE FAULTY BATTERY

Fig. 2

 

BATTERY

 

CHARGER

BATTERY

PACK

Fig. 3

LED FUNCTION OF CHARGER

LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BATTERY PACK:

1.Red LED lighted = Fast Charging Mode

2.Green LED lighted = Fully Charged Battery Pack

3.Yellow and Green LED Lighted = Control Charge or Defective Battery Pack.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Thank YOU for Buying a Ryobi Cordless DRILL-DRIVER Operators Manual Cordless DRILL-DRIVERTypical Applications Table of ContentsRead ALL Instructions Symbol Meaning Safety Alert SymbolRules for Safe Operation Know Your Cordless ToolImportant Safety Instructions for Charger Precautions on Using Your Cordless ToolPrecautions Regarding the USE of Charger and Battery Charger Specifications DRILL-DRIVERDisposal of the Exhausted Battery Battery Pack Preparation for RecyclingTo Charge OperationKnow Your DRILL-DRIVER Charging Your DRILL-DRIVERReversible SwitchSwitch Lock Variable SpeedKeyless Chuck To Install Battery PackTo Remove Battery Pack Battery Pack Port LatchesDrilling Installing and Removing BitsRight Removing BitsBIT Storage Screwdriving Torque AdjustmentTo Adjust Torque Torque Adjustment Ring To DecreaseMallet Keyless Chuck Jaws Chuck RemovalTo Retighten a Loose Chuck See Figures 13, 14,Batteries MaintenanceOverload Service Model NO. and Serial no

R10510, R10520, R10530 specifications

Ryobi is a renowned brand in the power tool industry, known for its commitment to innovation and quality. Among its diverse range of products, the Ryobi R10530, R10520, and R10510 models stand out for their performance, reliability, and user-friendly features.

The Ryobi R10530 is a versatile tool that excels in a variety of applications. This model is equipped with a powerful motor, delivering impressive performance for both heavy-duty and lighter tasks. One of its key features is the innovative 5-speed control system which allows users to adjust the speed according to task requirements, ensuring optimal precision and efficiency. The R10530 also boasts an ergonomic design, making it comfortable to handle during prolonged use. Additionally, the onboard LED lights enhance visibility, allowing for accurate work even in poorly lit areas.

The Ryobi R10520, on the other hand, focuses on portability and convenience. It is equipped with a compact and lightweight design, making it easy to transport and store. Despite its smaller size, the R10520 does not compromise on power, featuring a robust motor that provides sufficient torque for various applications. One of the standout technologies in this model is the advanced cooling system, preventing overheating during intensive operations, thereby extending the tool’s lifespan. The R10520 also includes a quick-release chuck, enabling fast and easy accessory changes.

Lastly, the Ryobi R10510 is tailored for those seeking a reliable and affordable option without sacrificing quality. This model is characterized by its simplicity and ease of use, making it a great choice for beginners. It features a single-speed motor, suitable for everyday tasks such as drilling and fastening. The R10510 is designed with durability in mind, incorporating high-quality materials that withstand wear and tear. Its compact design also provides great maneuverability, making it an excellent addition to any DIY enthusiast’s toolkit.

In summary, the Ryobi R10530, R10520, and R10510 each bring unique features and technologies to the table. Whether it’s the multi-speed versatility of the R10530, the portable convenience of the R10520, or the straightforward reliability of the R10510, Ryobi offers a suitable option for various users and requirements. With a focus on quality and user experience, these models continue to uphold Ryobi’s reputation as a trusted name in power tools.
Top Page Image Contents