Precautions Regarding the USE of Charger and Battery

RULES FOR SAFE OPERATION (Continued)

5.To reduce risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting charger.

6.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is properly wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet)	25 ft.	50 ft.	100 ft.
Cord Size (AWG)	16	16	16

Note: AWG = American Wire Gage

8.Do not operate charger with damaged cord or plug. Replace immediately.

9.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to an authorized service center.

10.Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

11.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

PRECAUTIONS REGARDING THE USE OF CHARGER AND BATTERY

1.Do not charge battery when temperature is below 50° F (10° C) or above 95° F (35° C).

2.Never attempt to connect two chargers together.

3.The charger is designed to operate on standard household electrical power. Do not attempt to use it on any other voltage.

4.Consecutive charging may cause overheating. If you need to recharge batteries consecutively, wait for about 15 minutes to allow charger to cool.

5.Do not insert foreign matter into the hole for the battery in charger stand.

6.Do not charge by means of an engine generator or DC power source.

7.Do not disassemble the battery.

8.Do not store the tool and battery in locations where the temperature may reach or exceed 104° F (40° C), such as outside sheds or metal buildings in summer.

9.Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.

10.Battery leakage may occur under conditions of extreme usage or temperature. If liquid comes in contact with skin, wash quickly with soap and water, then with lemon juice or vinegar. If liquid gets in your eyes, wash with water for at least 10 minutes and seek medical attention immediately.

11.Do not short-circuit the battery.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

Page 5

R10510, R10520, R10530 specifications

Ryobi is a renowned brand in the power tool industry, known for its commitment to innovation and quality. Among its diverse range of products, the Ryobi R10530, R10520, and R10510 models stand out for their performance, reliability, and user-friendly features.

The Ryobi R10530 is a versatile tool that excels in a variety of applications. This model is equipped with a powerful motor, delivering impressive performance for both heavy-duty and lighter tasks. One of its key features is the innovative 5-speed control system which allows users to adjust the speed according to task requirements, ensuring optimal precision and efficiency. The R10530 also boasts an ergonomic design, making it comfortable to handle during prolonged use. Additionally, the onboard LED lights enhance visibility, allowing for accurate work even in poorly lit areas.

The Ryobi R10520, on the other hand, focuses on portability and convenience. It is equipped with a compact and lightweight design, making it easy to transport and store. Despite its smaller size, the R10520 does not compromise on power, featuring a robust motor that provides sufficient torque for various applications. One of the standout technologies in this model is the advanced cooling system, preventing overheating during intensive operations, thereby extending the tool’s lifespan. The R10520 also includes a quick-release chuck, enabling fast and easy accessory changes.

Lastly, the Ryobi R10510 is tailored for those seeking a reliable and affordable option without sacrificing quality. This model is characterized by its simplicity and ease of use, making it a great choice for beginners. It features a single-speed motor, suitable for everyday tasks such as drilling and fastening. The R10510 is designed with durability in mind, incorporating high-quality materials that withstand wear and tear. Its compact design also provides great maneuverability, making it an excellent addition to any DIY enthusiast’s toolkit.

In summary, the Ryobi R10530, R10520, and R10510 each bring unique features and technologies to the table. Whether it’s the multi-speed versatility of the R10530, the portable convenience of the R10520, or the straightforward reliability of the R10510, Ryobi offers a suitable option for various users and requirements. With a focus on quality and user experience, these models continue to uphold Ryobi’s reputation as a trusted name in power tools.