Ryobi BS903 manual Service, Symbol Signal Meaning

Page 6

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

 

 

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

 

in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

 

in death or serious injury.

 

 

 

 

 

 

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in

 

minor or moderate injury.

 

 

 

 

 

 

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in property

 

damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand com- pletely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionGeneral Safety Rules Read ALL Instructions Blade Coasts After Being Turned OFF Specific Safety Rules  Before Making a CUT, be Sure ALL ADJUST- Ments are SecureSymbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningExtension Cords Speed and WiringElectrical Electrical ConnectionGlossary of Terms Blade Guide Adjustment Knob Lock Knob FeaturesProduct Specifications Rapidset Blade Tension Lever WorklightScale and Scale Indicator Angle Adjustment KnobBlade Guide Adjustment Knob with Lock Knob Switch and Switch KEYLoose Parts SAW Table Worklight Switch KEY Wing ScrewTools Needed Flathead ScrewdriverMounting Band SAW to Workbench AssemblyUnpacking Clamping Band SAW to WorkbenchMounting the SAW Table See Figures 6Blade Guide Knob Washer Wing NUT See Figures 9 Adjusting Blade TensionSquaring the SAW Table to the Blade Blade Tension KnobAttaching the Worklight To AdjustTracking the Blade If the blade has moved left or right of centerApplications Cutting ProceduresOperation Basic Operation of the Band SAWRemoving Jammed Material Locking the SwitchScroll Cutting Avoiding InjuryTilting the Table Using the Miter GaugeUsing the Sliding Table Extension See Figures 13See Figures 16 AdjustmentsInstalling and Adjusting the Blade Guard SAWBlade Guide Knob Adjusting Blade Guide AssemblySee Figures 18 Knob Unlock LockSee Figures 20 GuideThrust Bearing Lubrication MaintenanceGeneral Maintenance MOTOR/ELECTRICALTires BrushesDrive Belt Troubleshooting Problem Cause SolutionPage Parts and Service

BS903 specifications

The Ryobi BS903 is a versatile and efficient benchtop band saw that caters to both hobbyists and professionals looking for a reliable cutting tool. Known for its compact design and powerful features, the BS903 is an ideal choice for woodworking, metalworking, and various crafting projects.

One of the standout characteristics of the Ryobi BS903 is its 9-inch throat capacity, which allows users to make deep cuts into a variety of materials. With a robust 2.5-amp motor, this band saw delivers a cutting speed of 2800 feet per minute, making it suitable for tackling intricate curves and straight cuts with ease. The bandsaw also features a table that measures 15-3/4 inches by 18 inches, providing ample workspace for larger projects.

The BS903 incorporates a tilting table that can be adjusted from 0 to 45 degrees, allowing users to execute angled cuts with precision. This feature expands the versatility of the tool, enabling users to create beveled edges and complex designs effortlessly. Additionally, the built-in blade guide system ensures that the blade remains aligned during operation, enhancing accuracy and reducing the risk of deviation.

Another impressive feature of the Ryobi BS903 is its easy blade tracking adjustment, which simplifies the process of aligning the blade to the guide wheels. This user-friendly design promotes a seamless setup experience for both novice and experienced users. The band saw supports standard 1/4-inch blades, giving users the freedom to choose from a wide array of cutting options based on their specific needs.

Safety is a top priority in the design of the BS903. The band saw is equipped with a transparent blade guard and an integrated anti-kickback design, providing users with peace of mind while operating the tool. Additionally, the table is designed with a miter gauge slot, allowing for accurate crosscuts and better control.

Overall, the Ryobi BS903 band saw stands out in the market due to its combination of functionality, safety features, and ease of use. Whether you're a seasoned woodworker or just starting your crafting journey, the BS903 provides the reliability and performance required for a multitude of cutting tasks. With its thoughtful engineering, it's no surprise that the Ryobi BS903 continues to be a favored choice among DIY enthusiasts and professional tradespeople alike.
Top Page Image Contents