Ryobi MS180 warranty Operation, To Remove Battery Pack, Applications, To Install Battery Pack

Page 23

OPERATION

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

TO REMOVE BATTERY PACK

See Figure 32.

Locate latches on each side of battery pack and depress to release battery pack from your saw.

Remove battery pack from your saw.

APPLICATIONS

After all parts have been assembled properly and adjustments have been made to saw, battery pack can now be attached to saw.

TO INSTALL BATTERY PACK

See Figure 32.

Place battery pack in your saw. Align raised rib on battery pack with groove inside saw.

(Use only for the purposes listed below)

Cross cutting wood and plastic.

Cross cutting miters, joints, etc. for picture frames, moldings, door casings, and fine joinery.

Note: The carbide tipped blade provided is fine for most wood cutting operations. For fine joinery cuts or cutting plastic, use one of the accessory blades available from your Ryobi dealer.

3 0

31.62

4 5

DEPRESS LATCHES TO

LATCHES

RELEASE BATTERY PACK

BATTERY

PACK

Fig. 32

WARNING:

Before starting any cutting operation, clamp or bolt your compound miter saw to a workbench. Never operate your miter saw on the floor or in a crouched position. Failure to heed this warning can result in serious personal injury.

WARNING:

Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently for continuing safe operation, and instructing others who may use this tool.

Make sure the latches on each side of your battery pack snap in place and battery pack is secured in saw before beginning operation.

CAUTION:

When placing battery pack in your saw, be sure raised rib on battery pack aligns with groove inside saw and latches snap into place properly. Improper assembly of battery pack can cause damage to internal components.

WARNING:

Remove battery pack from tool when not in use, changing blades, or making adjustments.

23

Image 23
Contents Thank YOU for Buying a Ryobi Cordless Compound Miter SAW Save this Manual for Future ReferenceIntroduction Table of ContentsProduct Specifications Read ALL Instructions Rules for Safe OperationBlade Coasts After Turn OFF Before Making a CUT, be Sure ALL Adjustments are SecureWhen Servicing USE only Identical Ryobi Replacement Parts Important Safety Rules for Battery ToolsDo not Charge Battery Tool in a Damp or WET Location Important Safety Instructions for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Meaning Safety Alert Symbol Glossary of Terms for Woodworking Symbol MeaningNo Hands Symbol Framing Square UnpackingTools Needed Phillips ScrewdriverSAW Blade Work Clamp Loose Parts ListBlade Wrench Dust Guide Dust BAGTo Charge Battery Pack and Charging InformationCharging Battery Pack LED Function of ChargerKnow Your Compound Miter SAW Spindle Lock Button FeaturesCarrying Handle Miter Table ClampElectric Brake Trigger LockDetent Stops on Miter Table Bevel Lock KnobDust BAG AdjustmentsDust Guide Work ClampPhillips Screw Blade Bolt To Install BladeBlade Bolt Cover Phillips Screw Lower Lower Bladeblade Guard Guard BracketSee Figures 15, 16, 17, To Remove BladeSquare Miter Table Squaring the Miter Table To the FenceFence Framing Square Fence FramingSquare with Fence Squaring the SAW Blade to the FenceHead Screws See Figures 23Miter Table Combination Square Squaring the Blade to Miter TableSee Figures 27 Fence HEX KEY Mounting BracketBlade Miter Table Combination Square Lock Nuts Positive Stop Adjustment Screw for 45 AnglesDepth Stop Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment Depth Stop AdjustmentsApplications To Remove Battery PackTo Install Battery Pack OperationTo Crosscut with Your Miter SAW Cutting with Your Compound Miter SAWCrosscutting See Figures 34 Indicator Point Scale Bevel Lock Knob Mounting BracketBevel CUT To Bevel CUT with Your Miter SAWClamp Compound Miter CUT Compound Miter CUTTo Make a Compound CUT with Your Miter SAW See Figures 36Long Workpiece Support Long WorkpiecesSide COMPOUND-ANGLE Settings for Popular StructuresCutting Compound Miters PitchCeiling Fence Cutting Crown MoldingLaying Molding Flat on Miter Table Wrong Cutting Warped MaterialSee Figures 40 RightBatteries MaintenanceBattery Pack Removal Preparation for Recycling ¥ Service ¥ Model NO. and Serial no