Ryobi MS180 warranty Know Your Compound Miter SAW

FEATURES

KNOW YOUR COMPOUND MITER SAW

See Figure 5.

Before attempting to use your saw, familiarize yourself with all operating features and safety requirements.

WARNING:

Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

8-1/4 in. (209.6 mm) BLADE

A 8-1/4 in. (209.6 mm) saw blade is included with your compound miter saw. It will cut materials up to

2-1/16 in. (52.4 mm) thick or 5-1/2 in. (139.7 mm) wide, depending upon the thickness of the material and the setting at which the cut is being made.

CUTTING CAPACITIES

When the miter angle (miter table) is set at 0° and the bevel angle is set at 0°:

Your saw will cut materials up to a maximum of 5-1/2 in. (139.7 mm) wide x 2-1/16 in. (52.4 mm) thick.

When the miter angle (miter table) is set at 45° and the bevel angle is set at 0°:

Your saw will cut materials up to a maximum of

3-3/4 in. (95.3 mm) wide x 2-1/16 in. (52.4 mm) thick.

When the miter angle (miter table) is set at 0° and the bevel angle is set at 45°:

Your saw will cut materials up to a maximum of

5-1/2 in. (139.7 mm) wide x 1-1/2 in. (38.1 mm) thick.

When the miter angle (miter table) is set at 45° and the bevel angle is set at 45°:

Your saw will cut materials up to a maximum of 3-3/4 in. (95.3 mm) wide x 1-1/2 in. (38.1 mm) thick.

	CARRYING HANDLE		SAW ARM
DUST BAG		LOCK-OFF	SPINDLE LOCK
		BUTTON	BUTTON
	UPPER
	BLADE GUARD

DUST GUIDE

BEVEL

LOCK KNOB

BEVEL SCALE

FENCE

MITER TABLE FRAME

"NO HANDS ZONE"

BOUNDARY LINE

3

0

22 .

1 5

0
1 5
22.5
3 0
31.62	4 5

		SWITCH
		TRIGGER
R	O T A T I O N		LOWER
			BLADE GUARD
			NO HANDS
			ZONE LABEL
		5
		4
		62
		.
		31
		30	THROAT PLATE
		.5
		2
		2
		15
		15
		.5
		22
	.62	0
		3
	31
	45

MITER SCALE

MITER TABLE

Fig. 5

12