Ryobi C358 manual Cutting Angle Adjustment, Adjusting Width of CUT, See Figures 6, See Figures 7

Page 13

ASSEMBLY

ADJUSTABLE FENCE

See Figure 6.

The adjustable fence is located at the rear of the cut-off machine. As mentioned previously, it is used along with the vise clamp to provide a clamp for holding the workpiece securely when making cuts. It also makes the cut-off machine more versatile.

The fence can be rotated to obtain cutting angles from 0° to 45°. It also can be moved back to allow greater cutting widths in thin stock, or forward to allow greater cutting depths in tall or thick stock.

CUTTING ANGLE ADJUSTMENT

See Figures 6 - 7.

nUnplug the cut-off machine.

�n Using the hex wrench supplied, loosen the two hex head bolts securing adjustable fence. See Figure 7.

�n Rotate fence until the desired angle of cut on the scale is aligned with the indicator in machine base.

�n For precise cuts, check the angle of cut for the fence against the abrasive wheel with a protractor, bevel square, or other similar device.

�n Using the hex wrench supplied, securely tighten hex head bolts. Return hex wrench to its storage area in base.

�n This will secure the fence in place at desired angle.

See Figure 6.

ADJUSTING WIDTH OF CUT

See Figures 7 - 8.

nUnplug the cut-off machine.

�n To increase the width of cut of the cut-off machine, use the hex wrench to loosen and remove the hex head bolts and washers securing fence to machine base.

�n Reposition the curved slot of the fence with the threaded hole in back of the machine base.

�n Install a hex head bolt through a lock washer and flat washer into machine base. Do not tighten bolt securely.

�n Align remaining fence bolt hole with the middle threaded hole in the machine base.

�n Install hex head bolt through lock washer and flat washer into machine base.

�n Check and adjust fence to desired cutting angle.

�n Using the hex wrench supplied, securely tighten hex head bolts. Return hex wrench to its storage area in base.

n�This position is good for cutting thin and wide pieces of stock, such as flat or angled stock.

�n To increase the height of cut of the cut-off machine, follow the above procedure except place the rear hex head bolt in the middle threaded hole and the front hex head bolt in the front threaded hole.

�n Check and adjust fence to desired cutting angle.

SCALE INDICATOR

VISE CLAMP

FENCE

SCALE

ADJUSTABLE

FENCE

Fig. 6

ADJUSTABLE

FENCE

THREADED

HEX HEAD

HOLE

BOLTS

 

Fig. 7

ADJUSTABLE

FENCE

HEX HEAD

 

BOLTS

Fig. 8

 

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules USE only Flanges furnished with this cut-off machine Symbol Name DESIGNATION/EXPLANATION SymbolsService Electrical Speed and WiringExtension Cords Grounding InstructionsFeatures Vise Clamp Adjustable FenceCarrying Handle LOCK-ON ButtonLoose Parts AssemblyUnpacking HEX WrenchTo Remove To InstallMount to a Metal Work Surface Adjusting Width of CUT Cutting Angle AdjustmentSee Figures 6 See Figures 7Depth Stop Adjustments Using the Quick LOCK-RELEASE Lever and Vise ClampDepth Stop See Figures 9Applications OperationDepth Stop Bolt To Lower To Raise Switch Trigger Power SupplyCutting with the CUT-OFF Machine See Figures 12See Figures 14 CUT-OFFMaterial To be CUT Vise Crank Handle Fence ViseGeneral Maintenance MaintenanceBrush Replacement Brush CAP AssemblyProblem Cause Solution TroubleshootingService Model NO. and Serial no

C358 specifications

The Ryobi C358 is a powerful and versatile cordless lawn mower designed to meet the needs of modern homeowners seeking an efficient and eco-friendly lawn care solution. With its blend of robust features and advanced technologies, the C358 stands out in the competitive gardening equipment market.

One of the key characteristics of the C358 is its impressive 36V lithium-ion battery system, which delivers consistent power without the hassle of cords or gas. This battery technology allows for a longer runtime, enabling users to mow larger areas without interruption. Additionally, the battery is compatible with other Ryobi 36V tools, providing convenience and saving money on extra equipment.

The C358 features a cutting width of 18 inches, making it suitable for medium-sized lawns. Its adjustable cutting height, offering a range from 1 inch to 3 inches, allows users to customize their mowing experience based on the type of grass and desired lawn appearance. This level of adaptability ensures a neatly manicured lawn every time.

Ergonomics is another area where the Ryobi C358 shines. Its lightweight design and compact form factor make it easy to maneuver around garden beds and obstacles, while the folding handles offer convenient storage options. The mower's low noise operation further enhances the user experience, making it a pleasant tool for both the user and the surrounding neighborhood.

The mowing deck is engineered for durability, with high-quality materials that can withstand the rigors of regular use. The C358 also incorporates a mulching function, allowing homeowners to return nutrients to their lawns, promoting healthier grass growth while reducing waste.

Additionally, Ryobi has integrated innovative safety features into the C358, including a safety key and auto shut-off, ensuring that the mower operates safely. Overall, the Ryobi C358 is an excellent choice for anyone looking to maintain their lawn with efficiency, ease, and a commitment to sustainability. Its combination of advanced technology, thoughtful design, and environmental responsibility makes it a standout product in the realm of lawn care equipment.
Top Page Image Contents