Ryobi C358 manual Using the Quick LOCK-RELEASE Lever and Vise Clamp, Depth Stop Adjustments

Page 14

ASSEMBLY

nUsing the hex wrench supplied, securely tighten hex head bolts. Return hex wrench to its storage area in base.

�n This position is good for cutting tall and thick pieces of stock, such as square or tube stock.

QUICK LOCK-RELEASE LEVER

See Figures 9 - 10.

The quick lock-release lever engages the vise clamp to be used along with the fence to provide a vise for securing the workpiece to be cut. It also allows you to open and close the vise quickly without repetitive turning of the vise crank handle.

USING THE QUICK LOCK-RELEASE LEVER AND VISE CLAMP

To loosen:

See Figure 9.

nUnplug the cut-off machine.

�n Release tension on the vise clamp by rotating the vise crank handle 1/2 to 1 turn counterclockwise.

�n Lift up the quick lock-release lever as shown in fig- ure 9 and pull back on vise crank handle to slide open the vise.

To tighten:

See Figure 10.

nUnplug the cut-off machine.

�n Push the vise crank handle forward to slide the vise clamp against the workpiece.

�n Rotate the quick lock-release lever forward and push down as shown in figure 10 to engage its threads with the vise screw.

�n Rotate the vise crank handle clockwise to tighten the vise clamp against the workpiece.

DEPTH STOP

See Figure 11.

The depth stop limits the wheel's downward travel. It allows the wheel to go below the machine base enough to maintain full cutting capacities.

The adjustable depth stop is a bolt threaded into the base at the rear of the machine. To adjust the depth stop, use the hex wrench supplied to raise or lower the depth stop bolt.

The depth stop is factory set to provide maximum cutting capacity for the 14 in. abrasive wheel provided with the cut-off machine.

When the diameter of the wheel has been reduced due to wear, it may be necessary to adjust the depth stop to provide maximum cutting capacity. When a new abrasive wheel is installed, it is necessary to check the clearance of the wheel to the machine base support.

VISE CRANK

HANDLE

VISE

QUICK LOCK-RELEASE LEVER

CLAMP

WITH THREADS NOT ENGAGED

 

Fig. 9

QUICK LOCK-

RELEASE LEVER

WITH THREADS

ENGAGED

VISE

CRANK

HANDLE

VISEVISE

CLAMP SCREW

Fig. 10

DEPTH STOP ADJUSTMENTS

See Figure 11.

nUnplug the cut-off machine.

�n Loosen depth stop bolt that is against the machine base.

�n The depth stop is lowered by turning depth stop bolt clock-wise and raised by turning bolt counterclockwise.

�n By pressing down on the machine arm, lower the wheel and check clearance and maximum cutting distance (distance from adjustable stationary vise where wheel enters) to front of machine base slot.

�n Adjust if necessary.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules USE only Flanges furnished with this cut-off machine Symbols Symbol Name DESIGNATION/EXPLANATIONService Extension Cords Speed and WiringElectrical Grounding InstructionsFeatures Carrying Handle Adjustable FenceVise Clamp LOCK-ON ButtonUnpacking AssemblyLoose Parts HEX WrenchMount to a Metal Work Surface To InstallTo Remove See Figures 6 Cutting Angle AdjustmentAdjusting Width of CUT See Figures 7Depth Stop Using the Quick LOCK-RELEASE Lever and Vise ClampDepth Stop Adjustments See Figures 9Depth Stop Bolt To Lower To Raise OperationApplications Cutting with the CUT-OFF Machine Power SupplySwitch Trigger See Figures 12Material To be CUT Vise Crank Handle CUT-OFFSee Figures 14 Fence ViseBrush Replacement MaintenanceGeneral Maintenance Brush CAP AssemblyTroubleshooting Problem Cause SolutionService Model NO. and Serial no

C358 specifications

The Ryobi C358 is a powerful and versatile cordless lawn mower designed to meet the needs of modern homeowners seeking an efficient and eco-friendly lawn care solution. With its blend of robust features and advanced technologies, the C358 stands out in the competitive gardening equipment market.

One of the key characteristics of the C358 is its impressive 36V lithium-ion battery system, which delivers consistent power without the hassle of cords or gas. This battery technology allows for a longer runtime, enabling users to mow larger areas without interruption. Additionally, the battery is compatible with other Ryobi 36V tools, providing convenience and saving money on extra equipment.

The C358 features a cutting width of 18 inches, making it suitable for medium-sized lawns. Its adjustable cutting height, offering a range from 1 inch to 3 inches, allows users to customize their mowing experience based on the type of grass and desired lawn appearance. This level of adaptability ensures a neatly manicured lawn every time.

Ergonomics is another area where the Ryobi C358 shines. Its lightweight design and compact form factor make it easy to maneuver around garden beds and obstacles, while the folding handles offer convenient storage options. The mower's low noise operation further enhances the user experience, making it a pleasant tool for both the user and the surrounding neighborhood.

The mowing deck is engineered for durability, with high-quality materials that can withstand the rigors of regular use. The C358 also incorporates a mulching function, allowing homeowners to return nutrients to their lawns, promoting healthier grass growth while reducing waste.

Additionally, Ryobi has integrated innovative safety features into the C358, including a safety key and auto shut-off, ensuring that the mower operates safely. Overall, the Ryobi C358 is an excellent choice for anyone looking to maintain their lawn with efficiency, ease, and a commitment to sustainability. Its combination of advanced technology, thoughtful design, and environmental responsibility makes it a standout product in the realm of lawn care equipment.
Top Page Image Contents