Electrical, Extension Cords, Speed and Wiring

ELECTRICAL

EXTENSION CORDS

Use only 3-wire extension cords that have 3-prong ground- ing plugs and 3-pole receptacles that accept the tool's plug. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a drop in line voltage, resulting in a loss of power and causing the motor to overheat. Use the chart provided below to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used.

**Ampere rating (on tool data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length			Wire Size (A.W.G.)

25'	16	16	16	16	14	14

50'	16	16	16	14	14	12

100'	16	16	14	12	10	—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

When working with the tool outdoors, use an extension cord that is designed for outside use. This is indicated by the letters "WA" on the cord's jacket.

Before using an extension cord, inspect it for loose or exposed wires and cut or worn insulation.

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

SPEED AND WIRING

The no-load speed of this tool is approximately 3,900 rpm. This speed is not constant and decreases under a load or with lower voltage. For voltage, the wiring in a shop is as important as the motor’s horsepower rating. A line intended only for lights cannot properly carry a power tool motor. Wire that is heavy enough for a short distance will be too light for a greater distance. A line that can support one power tool may not be able to support two or three tools.

GROUNDING INSTRUCTIONS

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conduc- tor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or with- out yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is neces- sary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.

Repair or replace a damaged or worn cord immediately.

This tool is intended for use on a circuit that has an outlet like the one shown in figure 1. It also has a grounding pin like the one shown.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

ELECTRICAL CONNECTION

This tool is powered by a precision built electric motor. It


should be connected to a power supply that is 120 volts,
60 Hz, AC only (normal household current). Do not operate
this tool on direct current (DC). A substantial voltage drop	GROUNDING PIN
will cause a loss of power and the motor will overheat. If	GROUNDING PIN	GROUNDED OUTLET
will cause a loss of power and the motor will overheat. If		GROUNDED OUTLET
the machine does not operate when plugged into an outlet,
double check the power supply.			Fig. 1
			Fig. 1

C358 specifications

The Ryobi C358 is a powerful and versatile cordless lawn mower designed to meet the needs of modern homeowners seeking an efficient and eco-friendly lawn care solution. With its blend of robust features and advanced technologies, the C358 stands out in the competitive gardening equipment market.

One of the key characteristics of the C358 is its impressive 36V lithium-ion battery system, which delivers consistent power without the hassle of cords or gas. This battery technology allows for a longer runtime, enabling users to mow larger areas without interruption. Additionally, the battery is compatible with other Ryobi 36V tools, providing convenience and saving money on extra equipment.

The C358 features a cutting width of 18 inches, making it suitable for medium-sized lawns. Its adjustable cutting height, offering a range from 1 inch to 3 inches, allows users to customize their mowing experience based on the type of grass and desired lawn appearance. This level of adaptability ensures a neatly manicured lawn every time.

Ergonomics is another area where the Ryobi C358 shines. Its lightweight design and compact form factor make it easy to maneuver around garden beds and obstacles, while the folding handles offer convenient storage options. The mower's low noise operation further enhances the user experience, making it a pleasant tool for both the user and the surrounding neighborhood.

The mowing deck is engineered for durability, with high-quality materials that can withstand the rigors of regular use. The C358 also incorporates a mulching function, allowing homeowners to return nutrients to their lawns, promoting healthier grass growth while reducing waste.

Additionally, Ryobi has integrated innovative safety features into the C358, including a safety key and auto shut-off, ensuring that the mower operates safely. Overall, the Ryobi C358 is an excellent choice for anyone looking to maintain their lawn with efficiency, ease, and a commitment to sustainability. Its combination of advanced technology, thoughtful design, and environmental responsibility makes it a standout product in the realm of lawn care equipment.