OPERATION
TO ADJUST BEVEL SETTING
See Figure 23.
Unplug the saw.
Loosen bevel adjustment knob.
Raise motor housing end of saw until you reach desired angle setting on bevel scale.
Tighten bevel adjustment knob securely.
WARNING:
Attempting a bevel cut without having the bevel ad- justment knob securely tightened can result in serious injury.
TO BEVEL CUT
See Figure 24.
Hold the saw firmly with both hands as shown.
Rest the front edge of the base on the workpiece.
Start the saw and let the blade reach full speed.
Guide the saw into the workpiece and make the cut.
Release the switch trigger and allow the blade to come to a complete stop.
Lift the saw from the workpiece.
Bevel
Adjustment Bevel
Knob Scale
51. 5
45
30
15 | 3 |
| |
| 2 |
| 1 |
| 0 |
45° BLADE | GUIDELINE |
90° BLADE GUIDE NOTCH | |
GUIDE NOTCH | Fig. 22 |
51.5° BEVEL |
|
NOTCH |
|
51 . 5
45
30
15 
Bevel |
|
|
Scale | BEVEL |
|
| Fig. 23 | |
ADJUSTMENT KNOB | ||
motor housing
bevel scale
blade guide | Fig. 24 |
notch |
19