Ryobi CSB142LZ manual Parts and Service

Page 24

OPERATOR’S MANUAL

7-1/4 in. laser CIRCULAR SAW DOUBLE INSULATED

CSB142LZ

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Parts and Service

Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate.

• MODEL NUMBER

CSB142LZ

SERIAL NUMBER

How to obtain Replacement Parts:

Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-525-2579. Replacement parts can also be obtained at one of our Authorized Service Centers.

How to locate an Authorized Service Center:

Authorized Service Centers can be located online at www.ryobitools.com or by calling 1-800-525-2579.

How to obtain Customer or Technical Support:

To obtain Customer or Technical Support please contact us at 1-800-525-2579.

RYOBI® is a registered trademark of Ryobi Limited used under license.

ONE WORLD TECHNOLOGIES, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Phone 1-800-525-2579 www.ryobitools.com

987000-328

7-9-08 (REV:02)

Image 24
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Work Area SafetyElectrical Safety Personal SafetySpecific Safety Rules Causes and Operator Prevention of KickbackSpecific Safety Rules Symbols Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningCord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionFeatures Product SpecificationsAssembly Attaching Blade See Figures 2Installing Edge guide Installing Dust Nozzle KITRemoving Blade Operation ApplicationsKickback See Figures 7Lower blade guard is Up position when making a cut SAW BladesBlade Guard System Correct SupportAdjusting Blade Depth To adjust the blade depthSTARTING/STOPPING the SAW Index pointUsing the Laser Guide Turn OFFButton WorklightOperating the SAW See Figures 16To make the best possible cut Length of CUT Scale Cross CUTTING/RIP CuttingBevel Cutting See Figures 20To Adjust Bevel Setting To Bevel CUTBlade Guide Notch Guide NotchPocket Cutting Lower Blade Guard Handle Pocket CUTBevel Adjustment 0 Bevel Stop Knob Square Adjusting Screw HEX NUT BladeBevel Stop Adjusting the Lasers Adjusting ScrewSee Figures 27 Maintenance AccessoriesGeneral Maintenance Power Supply cord ReplacementParts and Service